Search results

Just my luck, a day late and a dollar short, same document number only the date is different, absolute military genius!!

I must still be looking at the wrong TM, this does not say it includes the 1151, 52

Thanks, I glanced at that TM but it does not list M1151 or M1152s

Could be there is a switch in the transfer case that lights up a lock light down by the shifter, it could be shorted or miss wired, try testing it again in low lock or high lock to be sure that is what is causing the gauge to read wrong. sometimes getting out of LL or even HL is a challenge

In what TM can I find the specs for Freon load etc. for the M1151A1? I did find one reference to 3lb 8oz for the 1151 just want to make sure that is right.

The TCM probably does not monitor the 5V reference output for a TCM bad indicator

If you are getting 12V to pin J and C on the cannon plug and ground is good to wire 599 then the 5v reference in the TCM is Kaput This would also explain the problem you are seeing on the engine speed sensor as the same 5V reference is used for the TPS, ESS and TTS (trans temp)

If you get all the way back to C4 and still no voltage the TCM is bad.:cry:

Yes one should be 5V There may be connections in between that plug and the TCM box because the wire at the TPS is marked C and at the TCM connctor is marked A so the next step would be to back up to the TCM box connector and see if you have 5V on pin d, wire 350A, if you do then start looking...

Looks like you are routing out all the problems!!

Things are a little clearer now, I knew the harnesses had been cut in many places and she was picked over pretty well. I found paperwork showing the Harris County Sheriff's DPT had turned in this M1097A1 into DLA for disposal. So they just went out and stripped anything they thought they could...

It is a little easier to read if you rotate it correctly.

Made the trip to pick up the M1097A1 it was a very uneventful trip, it was 102 on the highway so I cut the old girl some slack and ran only 70 loaded on the way home, with over 300K on her she has nothing to prove, Diggy Dog enjoyed the ride. I don't think we will be seeing any more HMMWVs come...

That does not jive with the documentation I gave you.

Can you tell me what page the voltage is listed on, I can't find it at first glance.

How many ohms does the speed sensor test to (disconnected)? are you using AC or DC scales, you do not have a code 71 so I am curious why you are looking at it.

But the tilt adapter is not mounted under the spring, yes? Those pictures look like there is a riser under the spring, probably to put the radiating element farther out of reach.

Careful inspection may reveal the moved the pre cups, that would explain why the injector angles are different. (along with possible other improvements to combustion) The 6.5L has a larger bore, this means the fire ring would land in a different place on the pre cups, it may work just fine but I...

I saw those pictures, looks like a "protected" spring,,,, AHH, so it is just a protection boot for the spring? What is under the bottom part of the boot? an extension for the base?

Double check, I don't think they are the same, the listings I looked at only stated 92-2000 6.5L