• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. A

    5-ton winch on m35a2

    Better to get the winch and trade it for the Deuce one...however, anyone with a load of scrap metal, and torches and drills can mount the winch on a Deuce... it will not be pretty....
  2. A

    Can you swap an M109 box for an M35 bed

    I remove mine with a small forklift on one side and a backhoe with bucket forks on the other... becomes a one Soldier job with the right equipment...2 lifts and drive out from under it.
  3. A

    deuce generator vs alternator

    Special pricing on 100 or more kits. rampartsllc@aol.com
  4. A

    deuce generator vs alternator

    I have the kits to convert from the 25 amp generator to the 60 amp alternator, genuine gummint, for $25....no alternator included, of course... but all the wiring and adaptors for sure...brand new sealed packages... 00-000-0088
  5. A

    5 ton pump

    Check with Mike Sarafan, I sent him a couple of them a coupla years ago and so far no $... That would be the LDS465-1A motor.
  6. A

    3 Lever Light Switch - Switching Table

    Ya, and the wiring diagrams are in your manuals as detailed on your dashboard ....and of course all the MV Mseries wires are coded the same..so you need only to get the list from this list or from Portrayal Press... Happy motoring
  7. A

    Looking for winter shift boot cover?

    Ya all want that for the main tranny or the xfer....??? I can supplly either for $40 USD but cannot export... what to do??
  8. A

    m35 hard tops and heaters

    I will have one here in a coupla weeks as my EUC is now in Battle Creek... Hard top $500, Heater $300, Winch assy complete with pto $1200 and the list goes on...
  9. A

    5 ton in PA

    Good luck with her... Best sounding trucks in the country.. Idling and working.. yea
  10. A

    moving along

    I have two brandy new windows for the front of that box... probably too late now.. as she is in new paint... looks good.
  11. A

    Winch brake grrr.. -DDoyle don't read this :)

    RE: Re: RE: Winch brake grrr.. -DDoyle don Attaboy JT... Just like the folks who take the batteries out of their smoke detectors because they don't like the noise... eventually they pay the supreme sacrifice and get no sympathy from me..
  12. A

    MWO question

    All I see is an ad for Supply Captain... no MWO image..
  13. A

    Trailer wiring

    I have a brand new original electric brake controller for the G742,,,original GI. In the box, made IN USA ... $200 plus post from 05822,
  14. A

    Need fuel tank

    Try Rich at Riv Rad in AL
  15. A

    Steering Problem and Solution

    Good catch, score one for the Manuals and NCOs....
  16. A

    M35A2 Axle shims needed

    Those parts may be available from a regular Rockwell truck parts dealer...on the civvy side..convert that Ordnance # to a Rockwell # and give it a try.
  17. A

    Intermittent Steering problems

    Probably the power steering pump.. Have you checked the fluid in the reservoir? Hey JohnFire... do you know Zero Davidson at 9th and Grant there in Pottsville..?? He is an old friend of mine and has 40 plus years of MV and Ordnance experience..
  18. A

    jumpstart

    If you only have one dead battery in your truck it is possible to jump just that bad battery just like you would in a car. However in most cases, both batteries will be dead and you will need two 12 v batteries and two sets of jumpers to get the job done.. or you can put the two outside...
  19. A

    Master break cylinder

    If it i s an aftermarket MC, the casting dimensions may be off a little...as one bolt was missing, it may have been replaced by Soldier #2 already at least once. Take the cap off and suck the fluid out and try turning it a little and angling it at the same time to get the bosses for the winch...
  20. A

    Looking for AM-2060 and MT-1029 mount,must be operable

    Brand new MT1029 in the box $35 plus post from 05822. PM me at rampartsllc@aol.com thx
114,068members
167,069threads
2,352,122posts
4,846online users
Top