• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. porkysplace

    Need help identifying "hole" in undercarriage of M925A2 M939

    Covered in TM9-2320-272-10.pdf TM9-2320-272-10 Operations manual for the M939 series trucks. Sept 2004 page 330
  2. porkysplace

    Supplies for a Long Trip

    Reading this TM will answer most of your questions , it should be read by everyone before operating . TM9-2320-209-10-1.pdf TM9-2320-209-10-1 Operation, Installation and Reference data for the M35 series, Operator Level.
  3. porkysplace

    Engine Cut-out at high RPM

    There is a drain on the primary fuel filter ( it is covered in the -10 operators TM )
  4. porkysplace

    Dana 60 ring and pinion

    Did you add any weight to the truck ?
  5. porkysplace

    Dipstick Wrong?

    Stick with what the dipstick says if it is a deeper pan , unless a longer pickup tube was added also .
  6. porkysplace

    813 nhc 250 cold start issue

    Have you replaced the rubber fuel lines ? If not that would the first thing to check . They are known for cracking and letting air into the system .
  7. porkysplace

    Scrapping ALERT: Somebody Save This Rare Truck

    Ford was pushing out 390 V-8's back in the 60's in the F-series.
  8. porkysplace

    M35A2 Brake line Size

    You have to do each wheel and the air-pac (air-pac first). Post #2 of this thread gives the bleeding order. Bleeding Brakes after Wheel Cylinder Replacement
  9. porkysplace

    M35A2 Brake line Size

    Since your working on the brakes this is another very useful thread ; Deuce Power Bleeder R4x4 Style
  10. porkysplace

    Deuce Jack Safety Questions

    This looks to be the jack pictured and should fit in a deuce tool box depending on how much other stuff you have in it. Click on the jack specs for size. http://www.homedepot.com/p/Big-Red-20-Ton-Air-Hydraulic-Bottle-Jack-TA92006/100595082
  11. porkysplace

    M35A2 Brake line Size

    Read this thread on brake fluid; : Brake fluid -how to tell which kind you have DOT 3 or DOT 5 On the brake lines read this thread; DEUCE BRAKE LINE REFERENCE GUIDE (Sizes, lengths, fittings)
  12. porkysplace

    Heads Up Florida! New DMV definition coming!

    GL is based in Phoenix, AZ , but they were a license car dealer in floridia.
  13. porkysplace

    Heads Up Florida! New DMV definition coming!

    Maybe they are updating the FMV law to address people trying the title/register the "OFF ROAD USE ONLY" HWWMV's that are being sold .
  14. porkysplace

    Heads Up Florida! New DMV definition coming!

    Dodge man what kind of FMV are you trying to register ?
  15. porkysplace

    My new (old) M1009 needs a new roof

    That looks like a Florida truck. Rusts from the top down , instead of the bottom up like here in michigan.
  16. porkysplace

    Removing Super Single Tires

    Check CL for a pallet jack.
  17. porkysplace

    Oil pressure gauge?

    Did you take the grounds off and clean them or just look at them ? TM 9-2320-272-24-1 troubleshooting section page235 TM9-2320-272-24-1.pdf
  18. porkysplace

    Pickup/shipping from Lockbourne, OH 4 items, about 125 lbs

    I would check his feedback and references but this thread was posted a while ago. Delivery & pick up loads out of Columbus ,Oh
  19. porkysplace

    Govplanet titling

    But when it finally does come you will be like Steve Martin. https://www.youtube.com/watch?v=-7aIf1YnbbU
  20. porkysplace

    Metal in Rear Axle?

    Might be a good time to add a locker.
Top