Search results

these are the things i seem to be running into. and mounting the head would be a challenge. ill probly just leave it alone. thanks

hello guys , ive have followed you guys on the (towing the 105 thread) trying to get some ideas with my set up. i have a 103a3 that iam in the process of restoring along with a pair of 5kw gensets that will go on it. i towed just the trailer from s.c. to la. with no problems , but without the...

i have had two that had similar problems fuel solenoid rod was sticking because the governor arm had a bow in it (bent) look at the angle.

can anyone tell me any easy way of rigging some brakes on this trailer/gen. set up? ill only be pulling it with my pick up. i have considered surge brake and wondered if the surge head off a 116a would work for this heavier trailer. although i havnt figuered out how i would mount it. with an...

i just got my euc approved at hooks (red stone) and dont need it i have others closer. anyway if anyone is intrested give me what i have in it $220.00 cond. code b4

i have a couple 002s and their tough as nails have good voltage regulation and use .54 gph of fuel not bad if you ask me 78db at 25 ft.. mine can power 3 ac units a 14,000 and 2 6,500 a freezer and fridg. never going beyond 65% load. if you live in close quarters then you might consider a 4 pole...

got it. looked at a previous thread and backed the nut against a wrench placed between the landing gear plate and the shaft end . thanks all

i picked up a m103a3 yesterday. iam trying to remove the the lunette to flip it. attacked it this morning with a mall wont budge. has anyone else had a stubborn one?

hey speddmon, myself like alot of others i think hold the start switch until the oil preasures up which can be awhile and burning the bridge has worried me. do you think a toggle switch to close the oil preasure switch until oil preasures up and then releaseing the switch to restore the safty...

hey ed, if you want to part with 1 or 2 kits let me know what you need to get for them i have a couple of these generators and would be intristed. thanks jim

i won a gl auction on a generator and have to summit a euc form. i filled it out and plan on emailing monday. i started reading some freq. asked question part and it stated it would take up to 45 days for first time bidders to get approval. can some of you tell me how i can expect it to go. i...

ive used 20-50 mobil one syn. motorcycle oil in a genset with this engine for a while now. was using syn. 20-50 harley davidson motorcycle oil .changed for cost reasons. tried straight 40, 15-40 also but settled on the 20-50 seems to pump lifters up faster. these oils are for air cooled...

hey james where did you get your receiver? looks like a good rise.

i need a freq, transducer and good hertz gauge if ypu still have. i sent you a private message a while back. let me know jim

is that the wire from rear connector j2 thats connected to the back of the ground lug?

are you saying the wire attached to the ground lug from the ac control box is the neutral ground strap?

i recently aquired a mep002. i remember i went through this before on hooking up my mep 803 and i removed the nuetral ground strap at the gen. and grounded the frame of the gen. to the ground rod of the house. i was wondering were is the strap is located on the mep002? i guess it might be in the...

hello i had asked you about a good fuel tank a while back when you were thinking about parting out. let me know if you still have and how much. thanks

furl siphen the military siphen has a vent in the head. if you remove the lever you will spot the hole. ive picked these up on ebay before.

get it 75 ft. or so away. i did this and with the house closed could hardly here it. this was my first mil. set enjoyed working on them.