Search results

If you find all else to be okay, and conclude it is the "stuff" you bought from me, let me know. Jerry :grd:

A lot of patience required.

Who said this site only responds with "read the TM". Got to nurture the young. Jerry:beer::beer:

Good luck. Hope all works out for you. Jerry

you have to "pop test" it. That requires a test set-up to do adjustments. About 1,700 psi on the injector. It is not good to fool with injectors unless you are set up to adjust them.

Thanks. Didn't realize the 112a was included in that list. Jerry

Anyone know a 112a TM source? I'd like to check parts interchangeability with MEP-002a and 003a. Thanks, Jerry

Thanks Speddmon. Hedgehog, I may be able to help you on the T1. Pm me if you need it and I'll check availability. Jerry

You got a problem. The boxes are NOT the same, including the breaker and the windings. I am not sure about the voltage rectifier. Speddman probably can advise on the rectifier. Jerry

Man, You got it together. Looks great! Jerry :beer::beer:

Could the gear cover be cracked? One of the four I stripped for parts had a cracked gear cover and the one I bought for a ridiculously high price last summer was perfect except for cracked gear cover on the exhaust side of the unit. Seeping oil leaks. Same gear cover for 002a and 003a...

Welcome to the board! Looks like you have a winner! It appears like there is a rebuild plaque above the data plate. If so, and it was done right. You have a new generator (practically speaking). The black box looks like a Solargizer control unit to maintain batteries. Congrats, Jerry...

I believe I have a couple. Will check when I get home Sunday. Jerry

"Or- willing to trade it for a smaller set or functioning set and $ if you like to restore these things......." I have working MEP-002a's but have not advertised them. Depending on condition of your unit, might be possible to do what you suggest. I'm about 3 hours from you in Mathews County...

FYI, I've noticed that a lot of the GL generators have Solargizers installed. Apparently units in the field found them useful as have I on the two I installed on mine. Jerry:beer:

I have a friend who works for a hvac company. they scrap all old heat pump interior units they replace. the units have strip heaters in them for emergency heat, usually 10-15kw set up in 5 kw strips. I got a 10kw, disabled the second strip, have a 5kw load bank, wire it direct to the...

I've got a couple of working IPs with timing button. If interested, PM me. Jerry

That high temp switch is a sleeper. Caused me to conclude that I had 3 bad fuel shut-off solenoids before I figured out the set I was testing them on had an intermittent bad high temp sensor. I need to use a different set for testing, but with the rain, haven't felt like getting soaked. The...

Jim, They look fantastic! You have a heck of a collection. What paint do you and your bride use? Jerry

Ike, I bookmarked this thread. Best tutorial I've seen on generator selection. Thanks. Jerry:beer::beer::beer: