Search results

BUMP. It is supposedly allowed weekly Angus. Jerry

Speddman has it right. Comfort is the issue. First get it running. Jerry

What wiring is not needed, in your opinion? Jerry

They are the same. Faces are available. Jerry

BY golly, I'll bet Clinto got a gold star if he turned that in at anger management class. Originally Posted by clinto OK Ron, I've had to read these various anti-technology rants of yours several times, so I am going to school you on how this works. Because........... well...

I'm looking at some stuff on GL that might do the trick, but you would have to own a hundred generators. Think I'll try for it anyway to do my over sized gen shed and garage door. [thumbzup]

I've got to agree with Carl. Charge the batteries first so you get a truer picture. Jerry

If "hdexpert" can't help you, I can likely hook you up. Jerry

This is a year-old post by Joesco. But, I'm curious as to what you are describing as the starter lock out switch, and how it is adjusted. Please provide more info. Jerry :beer:

Are you getting fuel returned to the tank when unit is running and when you are priming the fuel system? Jerry

Don, I hope you are not backing it if he keeps running it pegged to the left. Jerry

PM me for help on the air intake heaters. Jerry

Peter, No check-valve. Am learning every day. Thanks. Jerry

Guys, I made a tester from a bolt 7/16x24 and drilled through it on my wood drill press (with a very good bit and a couple of tries. I think I told you about it Stan. When you were here, I was concerned about compression on one MEP-002a and was going to order piece-parts to put together a...

All of Sewerzuk's checks apply. Good luck! Jerry

Right or wrong, I have never grounded any of mine for testing. Jerry

Congratulations Stan! Great job. Jerry [thumbzup][thumbzup][thumbzup]

If you get 1% droop, you are beyond specs. You set it for 61.5 no load to get 60 at load. Jerry[thumbzup]

To turn the knurled nut, use a wide bladed flat tip screw drive and a hammer, Use the screw driver on the teeth of the ratchet, turning the spring up or down on the shaft for adjustment. You don't need to remove the fan cover unless your are resetting low idle and max speed. Jerry

It is page 28 of the -34 TM, Table 1.1 Jerry [thumbzup]