Search results

The knuckle boots I get have "Top" stamped on them, The left side zipper installs towards the front of the truck, but, the right side zipper is toward the rear and interferes with the steering stop bolt. Is this right?

Diesel Smoke, Do you know the psi rating or part #

I agree JDT, the Parts Cross Reference should be revised. I will look at Napa for the correct cap and post a new number.

So what is the danger zone temp of a multi-fuel engine? I have seen few hit about 190 traveling up steep canyon roads, other that that they seem to stay around 160 ish.

I agree! Sue 'em!

In the parts cross reference a Napa 703-1422 radiator cap is listed. It is a 10 psi cap and in the PS Mag Article the correct cap is a 6.5-8 psi cap. Could this cap cause some overheating issues or what? This might need to be revised. Matt

We are exempt, government!

Less A/C System Capacity 24.8 qt (US) With A/C System Capacity 24.8 qt (US)

So what are the pros and cons of the 700R4 switch? What about the PRNDL? There will be a overdrive now!

Good question, I found this on a fire truck inspection. Guess what, I get to haul it in and repair it!!

I am in fort collins. I got it fixed today. I left the gear box in the frame and took the cover off. I had to use a fork lift to raise the engine slightly to remove the cover and one bolt. I loosened the front engine mounts and it worked well. THanks!

You should be able tro find one at the parts store that will work, weld on or bolt on with a u-clamp.

What's the booster pump? Move the engine over to the passenger side?

pics!

Well I installed a spin on fuel filter because the filter base kept leaking after I had it off twice, I think a small freeze plug was leaking. I was fighting a surge when first started and now it is fixed. I wanted to find a filter with a drain on the bottom but the napa brand filters were all...

Here is the bent torque arm and damaged bushing. Ouch!

I am in the process of removing the gear box due to a hard steer problem noticable at 20mph+ on left turns only. The steering wheel gets hard to turn and then doesn't turn back to center when you let go. I can see a lot of end play in the shaft that comes out of the box, all 4 bolts attaching...

Tell them it is a 19** K30 1 ton 4wd and this hose will work.

What is the correct NSN number for this part?

I came up with a 192078757685 part number out of one of the TM's. Does this sound right? My right front lower torque arm is bent and the rubber bushing is damaged. Does this part number include the arm and both bushings? Thanks for the help.