Search results

Hey...a 24 volt cig lighter .

I have an A2 12k chassis, and it has the standard stamped steel rear spring mounts.

I have 10 + New vic3 hwy cables 19 ft available

6.2 and 6.5 detuned have the same w/p. 6.5NA and 6.5 Turbo have the same w/p. They cannot be swapped unless you change the w/p backing plate also.

Nope...both tested normally open.

Here's the shifter. The upper switch is a neutral sw., lower one is Rev. switch. The hole in shifter for rev. sw. is bigger, thats why they use a bushing as seen in photos. Bushing outer diameter is about 3/4" .

.Cut full doors off, leave enough window channel for inner door handle. Steel skins fabricated by a friends friend. Pic on next post.

No way to illuminate the windshield mount one, unless you use the buss bar type on the windshield mount.

Theres no napa switch. Military switch 12338435

Check your main bracket.....the long skinny slotted part of it tends to crack when the rear bracket gets loose , and sometime the exhaust stud shears off. Then with a combination of some above condition....Alt. tab could break.

I have lots a new 19 ft hwy cables available. CX-13470/VRC or A3206018-19

To mount a Mk64...there's alot of other parts. Do you have them ?

And...its missing the offset part. Normally 4 ea. outer parts and a doubler or 2 inside fender.

You need it hooked up to the battery for it to work.

Gov planet sites like to use starting fluid which is a no no.

Its an H turret. Two guys in Texas has them, one is mounted. I found one at Paul Mollers place.....only the big parts, and sold it.

And...the early and late 12 bolt and even spaced 24 bolt wheel uses the same valve stem assembly. Odd spaced 24 bolt uses a different valve stem.

Hmmwv wheels wont fit M101A1....has the wrong axle / drums. Now a M101A2 can be used.....it has the proper 8 lug pattern. Some guys used a wheel spacer to bring the hmmwv wheels out a little to clear cable and or structure.

Get the early, or late 12 bolt or 24 bolt wheels with the one piece runflat/beadlocks, and then your ok. 8 bolt wheels and 36" R/T's should be in a land fill, or something. I use those 8 bolters and bias tires on trucks in the yard to roll around, and do paint work on, so good tires / wheels...