Search results

. Posi-Tap connectors are much more durable than scotch-locks too!

. Have't done all the reading about your situation, but there are companies that can test that motor oil to figure out what kind of life is left in it. Or if it is contaminated with coolant or if it is just perfectly fine. Guessing you already know, but diesels make black motor oil in just a...

. Suggest that you read... Same deal but nicer - right? And maybe point to a specific page in the PDF. Still can't make some people do it though. Like the horse and leading it to water...

. Yeah!!! That's the stuff. @adf5565 this is the magic that you are looking for! @Sharecropper , This is FANTASTIC and Thank You for already having the answer!

. In a real parts house - with an old guy behind the counter and no computer - you might find a seal that replaces yours with a "Wear Ring" in the box. The wear ring is a thing metal sleeve that covers up the grove in your flange. The seal will drive in normally and the rubber part of the seal...

. How about a picture? My M1089 has no pin - OR - there was never a pin in a hole on the turntable on my vehicle. The M1084 is by the same manufacturer, so logic says if one is "pinned" the other would be too.

. You speak the truth @sp00n ! Exactly as you said it... Buy it how you want it, or expect to pay more than you would have spent to buy it "your way". Turbo upgrade and going from a 3 speed to a 4 speed are going to cost as much as buying the truck again.

. Like the BGM-109?

. The hard part is either deciding or knowing - depending on how long you have been in the game - that you have to commit at least a Saturday a month to maintenance. The more you do it, the better you get at doing the job. Then there is the vehicle itself. It is newer or older? Some of the...

. So, is that a MANN version of the HET?

. + Edits No this is standard SOP for all these trucks with the standard PCB Box on it. The glow plugs turn on, turn the "wait light" off, then you crank the truck. Then the glow plug controller to "pulse" the voltage to the glow plugs to help warm up the cylinders more quickly. The pulsing...

. I remember that forever we used Chrome Moly for wheel bearings. There may well be better stuff out there, but of all the things we had go wrong - wheel bearings "going dry" wasn't a problem. The exception for trucks that were in swamps for months at the time... Even then it wasn't because...

. Any chance you could steal the bleeder off your old Brake Booster? Maybe swap one for the other and solve your problem? Might be that the current bleeder got mashed or something like that?

. Like @Mogman mentioned earlier - don't hesitate to ask questions. No such thing as a dumb question. Unless it gets asked, answered, then asked again ignoring the first answer.

. The "one knuckle" measurement is a good safe fill level for the differentials. Not too much. Not too little. Kinda like the Three Little Bears - Just Right...

. Agreed. The drop down dovetail "Departure Angle" will get you hung on a hill if you are out in rough terrain. The good news is that there won't be a lot of folks who will be out in the woods with a truck with air brakes. Spring brakes will put it in place and then you could unload the...

. Do you remember - back in the day - when "Made In Hong Kong" or "Made In Taiwan" was the cheapest, most useless stuff in the world?

. I would agree except that at some point in time, the US Army sprayed it with CARC. I think there is a date on it too - but definitely has the word stenciled on the door. Maybe they keep wreckers longer than troop transports maybe? I dunno. Mine is definitely an A0. Mine also isn't...

Just so you can see it, the hard top that I bought came with woodland camo already painted on it. You can see from the picture below that my 1983 Wrecker (M936) is 383 Green and the truck and the top are a really close match. The boom in the picture below has some 383 RAPCO Rattle Can Green...