Search results

Yes I have found that sometimes just a little baby hair turn on the crank one way or the other the Head pops out. I believe the ware in all the gears starting at the crankshaft will cause the cutout washer on top of the quill shaft to be a hair off. If the quill shaft of never turns after you...

You just use a small round bar in between the U joint. Turns very easy. Your working to hard.

Why would you jack up the rear axles just put the transfer case in neutral transmission in 5th. Turn jackshaft.

I have one MTV tractor, five Deuces plus ten 809 series five tons and one M915A2. I would love to sell my MTV and keep one Deuce one five ton dump, one 5 ton wrecker 809 series and the 915. The Deuce is simple ,multi fuel and CME proof plus manual trans so it could be pushed started. As said...

There is better people than me on this board for electric stuff. Could you use a multi meter and see if there is continuity between one wire and the housing. If not then would it matter what wire was power to make it trip.

A Deuce will always be a better bet than a FMTV. Who is we do you have a mouse in your pocket.

To me it would be what ever it was with no power so maybe blow through it and see if it is open or closed. I bet two cents N/C

ouch. Wonder if it would work no matter which way they were hooked. Myself I would just make some quick pig tails on it and test it on a 24 volt source.

I have one truck that has the Firestone 10R20 t831 and love them as most of the driving is on road. They have a pretty good lug for off road and the truck handles so much better. I can't see wearing out the big lug tires if most of the driving is on road. My 915A2 had 22.5 tubeless but I had a...

If needed you can have the computer on the car downloaded to see if they were speeding.

Don't know why I try but to keep papabear happy.

You really posted that.

Brakes air brakes. Get rid of the ball and go with pintle.

If I make it then tools should be covered and long as we don't need to do open heart surgery.

So this means that you are wanting your birthdays spanking like always. As ZZ top said I can handle anything just this side of deranged.

Yep don't know how I got in so deep. Wish scrap prices were higher I would be rich.

Sorry no Ambac. The pic still looks bad but your palm reading says you will live long and perspire.

A four star general should be up on his machines.:burn:

That button does not look good but maybe it's my eyes. Can you take a better pic of the button and sideways to. The only markings on my button is 03.

The problem on most of mine was the cylinder on the transfer needed rebuilding. Had one where the poppet needed rebuilding and one that the whole poppet system came loose and blew it's gasket. I had a Tec tip long time ago about the poppet gasket and that everyone that had a 809 series should...