Search results

let me know if you need the signal corps drawings of the wood mounting blocks and location on the sponson.

Need you to triple check the connection of the wires to the ignition switch.

What happens at this point if you move switch to start?

Your trailer does not appear in any of the usual military equipment reference manuals.

That is metric.

Where did you disconnect the starter trigger wire, at the starter or at the ignition switch? When you did this, did the instruments come on in “run” position?

Sounds like the wires to the ignition switch are not in the right place.

No. Rent a 580K for a week and spend your time digging not repairing.

Almost always rain water. Pro tip: don’t buy the units with no exhaust flapper in the pics.

Pressed on the rotor. Not one of Dana Corp's better ideas but it works.

Not sure about your neck of the woods Drew but here in the Houston metro area, driving around with mounted weapons results in dozens of 911 calls and a bigtime butt chewing from the popo.

Yeah that dude used to post on here but it's been a long time. I can't remember if I called him out for his practice of driving around with mounted weapons fake or not. That has always been a huge nono in this hobby. Really freaks people out.

Pic is funny as can be. In the pic, I see what looks like a rusty steel semicircle pointing up that seems to form a skid under the centerline of the shelter. I have never seen a S280 with a steel skid like that, only aluminum runners. If the rusted away steel skids are non original or...

Looks like the Go Dov chapter in these truck's lives may be over, Eastern Surplus & Equipment ( a supporter of this site ) just bought (the remaining?) 60 of these ... Good luck Dave! Quite a commitment.

Agree with Simp, my much larger track hoe struggles to pick up a 3000 lb shelter with the stick out.

Either. The trans/transfer assy will be on the ground, if you are rebuilding the trans, the rebuilder will appreciate if you have the adapter off already.

It stays in position.

This was a WWII thing for the most part, and when found on ground vehicles, was symbols painted on tank barrels.

Sounds like previous owner did zero maintenance and every mechanic to touch it since did not know what they were doing.

If you don’t live anywhere near a galvanizer, zinc rich epoxy primer works almost as well. Still have to sandblast to white metal. Don’t leave rust pits or re-rusting will occur.