• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1078 LMTV Fix-up Thread

FarmingSmallKubota

Well-known member
Steel Soldiers Supporter
488
1,153
93
Location
Wapakoneta, Ohio
I wouldn't call you a weekling. That crane is heavy and there was nothing fun about mounting it inside the canopy when it was hot outside by myself. Also glad its not just me that had the issue with the rivets interfering with the boom sliding in. Lastly do you see the hex bolt mounted on the bottom of the can holder rubbing a hole in the scepter cans?
 

CallMeColt

Well-known member
Supporting Vendor
1,052
1,520
113
Location
Wilson County, Texas
I wouldn't call you a weekling. That crane is heavy and there was nothing fun about mounting it inside the canopy when it was hot outside by myself. Also glad its not just me that had the issue with the rivets interfering with the boom sliding in. Lastly do you see the hex bolt mounted on the bottom of the can holder rubbing a hole in the scepter cans?
Yeah, it's a tank!

Genuine issue military "cans" (even though the new ones are plastic) have notches at the bottom so those bolts at the bottom will not rub. Something I didn't think to talk about in the video. Similar to how the mount itself has the bolt heads not flush.
 

Third From Texas

Well-known member
2,777
6,529
113
Location
Corpus Christi Texas
Not sure how i missed this video great as usual, but lets talk about that chair. is that custom or one that could be obtained
The seats are all stock LMTV seats. Pre-A1R have a metal plate under the seat, the A1R has no plate and won't smack your butt on every bounce). Not sure which he has here, but if they have a release lever they are the A0 style. If the have a release knob they are the A1R style.

If you are asking about the headrest behind the driver seat, that's an OEM A1R thing. The stowage box normally has a cargo net over the opening as seen there. I've never seen the box/headrest for sale, but I might know where one is available though.
 
Last edited:

FarmingSmallKubota

Well-known member
Steel Soldiers Supporter
488
1,153
93
Location
Wapakoneta, Ohio
The seats are all stock LMTV seats. Pre-A1R have a metal plate under the seat, the A1R has no plate and won't smack your butt on every bounce). Not sure which he has here, but if they have a release lever they are the A0 style. If the have a release knob they are the A1R style.

If you are asking about the headrest behind the driver seat, that's an OEM A1R thing. The stowage box normally has a cargo net over the opening as seen there. I've never seen the box/headrest for sale, but I might know where one is available though.
not talking about the seats in the LMTV. talking about the rolling chair he had when fixing the air dryer.
 

Ronmar

Well-known member
3,881
7,549
113
Location
Port angeles wa
That is a mechanics chair/creepr for a lift. I ended up returning it because I was hoping it would recline enough to go under the truck, but it didn't.
yea, I am tempted to build a maintenance trench in its normal parking spot. Its too far from the ground creeper to up in between the frame rails:) I saw an elevating creeper used by aircraft owners, but was a little too rich for my tastes and I will probably not ever have a pad or shop large enough anyway... Maybe a 36" X 36" trench say 12ft long? That would allow me to stand upright under much of the truck, or set on a stool under the low spots... At some point I am going to have to stop rolling around on the ground anyway...
 

CallMeColt

Well-known member
Supporting Vendor
1,052
1,520
113
Location
Wilson County, Texas
yea, I am tempted to build a maintenance trench in its normal parking spot. Its too far from the ground creeper to up in between the frame rails:) I saw an elevating creeper used by aircraft owners, but was a little too rich for my tastes and I will probably not ever have a pad or shop large enough anyway... Maybe a 36" X 36" trench say 12ft long? That would allow me to stand upright under much of the truck, or set on a stool under the low spots... At some point I am going to have to stop rolling around on the ground anyway...
I've thought about doing a pit like this when I make my next carport.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks