• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What did you do to your deuce this week?

Tracer

Tracer

Well-known member
Steel Soldiers Supporter
6,619
14,094
113
Location
Hawthorne, NV.
DSCF2055.jpgDSCF2056.jpgDSCF2057.jpg I spent the afternoon today replacing the Wire Harness Retainer Bulkhead Grommet. The rubber coating had disintegrated off the old one and the wiring harness was riding on bare metal. I was able to scrounge up a new one, and with new hardware it went together pretty easy. I have a new grommet ordered from NAPA to replace the dry rotted grommet for the air cleaner vacuum line just outboard of the wire harness. After 11 years of owning this Deuce, outside of regular maintenance, this detail work is pretty much what I spend the majority of my time on.
 
rustystud

rustystud

Well-known member
9,298
3,072
113
Location
Woodinville, Washington
Tracer said:
View attachment 738016View attachment 738017View attachment 738018 I spent the afternoon today replacing the Wire Harness Retainer Bulkhead Grommet. The rubber coating had disintegrated off the old one and the wiring harness was riding on bare metal. I was able to scrounge up a new one, and with new hardware it went together pretty easy. I have a new grommet ordered from NAPA to replace the dry rotted grommet for the air cleaner vacuum line just outboard of the wire harness. After 11 years of owning this Deuce, outside of regular maintenance, this detail work is pretty much what I spend the majority of my time on.
Click to expand...
It's surprising (considering the "minimalistic" attitude of the military) how many little things there are that need attention.
Little grommets here, little valves there. Strange little things that no ones even knows what there for ! All rotting or rusting and needing attention now.
 
Tracer

Tracer

Well-known member
Steel Soldiers Supporter
6,619
14,094
113
Location
Hawthorne, NV.
rustystud said:
It's surprising (considering the "minimalistic" attitude of the military) how many little things there are that need attention.
Little grommets here, little valves there. Strange little things that no ones even knows what there for ! All rotting or rusting and needing attention now.
Click to expand...
You hit it on the head Rusty. Tomorrow, I have to replace one of the connectors to my fuel gauge. When I hit a bump or wiggle the wire by hand the fuel gauge bounces back and forth. Drives ya nuts.
 
77 AMG

77 AMG

Active member
403
62
28
Location
Owingsville, KY
I stated digging out and sorting through a trashcan of taillights that I had forgotten about that I have had for about 12-15 years. Found it in the barn today looking for an old set of bumper "Rookie Bars" that I have somewhere.... Oh, and a "I bought a moneypit" picture of me and "El Duece".
 

Attachments

Menaces Nemesis

Menaces Nemesis

"Little Black Truck" Conservator
Steel Soldiers Supporter
333
262
63
Location
Denver, Colorado
Hacked out some transmission alignment pins for my upcoming clutch,trans, etc., work. Got the idea from a post RustyStud made in a transmission thread here somewhere. 3/8 x 3-1/4 steel rods, tapered and slotted for a screwdriver on one end, threaded 3/8-16 on the other end.
IMG_20180820_132046663.jpg
 
Aussie Bloke

Aussie Bloke

Well-known member
729
404
63
Location
Lost, out bush in OZ
G'day everyone,.....



Well, just dropped the Deuce back into storage after having it at home for about 3-4 days,....

Was meant to do its first service but the day I got it the weather here changed,.. got so #$*@ing cold,...

I did get to change out the coolant though at least, the reason I didn't get any further was it SNOWED for a couple of days,...

Anyway I have planned to get my Deuce out again in a week to do all the oil changes,....

Sometimes the plan dose'nt quite come together,...

sigh,....




Aussie.
 
Wolfgang the Gray

Wolfgang the Gray

Active member
Steel Soldiers Supporter
318
36
28
Location
New River, AZ
Aussie Bloke said:
G'day everyone,.....
Well, just dropped the Deuce back into storage after having it at home for about 3-4 days,....
Was meant to do its first service but the day I got it the weather here changed,.. got so #$*@ing cold,...
I did get to change out the coolant though at least, the reason I didn't get any further was it SNOWED for a couple of days,...
Anyway I have planned to get my Deuce out again in a week to do all the oil changes,....
Sometimes the plan dose'nt quite come together,...
sigh,....
Aussie.
Click to expand...
Snow?! I never saw snow when I lived Down Under. I guess you must be very far from where I was in Woomera, SA.
 
Mrmag1

Mrmag1

Head of Stuff N' Things
Steel Soldiers Supporter
602
14
18
Location
Hereford Arizona
IMG_20180826_150408.jpgIMG_20180826_150426.jpgIMG_20180826_150617.jpg

I ordered new data plates from Big Mikes MotorPool. The only problem is that they are a bit bigger than my old ones (see last picture) and not having a drill press made it interesting to tap the holes.
 
You must log in or register to reply here.
111,192members
165,488threads
2,328,799posts
1,070online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks