Recent content by goatijoe

Does any one have a list of the parts that you can go to Napa,Carquest or orlies auto parts I had one at one time can’t find it and I’ve tryed to search on here with no luck on finding it

he said the blower was turning in it when he check it

https://drive.google.com/file/d/1POtwtsilR1AXe97DZGv_iAmDTM0e6pV0aQ/view that's a video of what it's doing

how do I unstick it or do I need to worry with it

I have noticed that when your are at cruising speed the oil pressure is over 120 and I have changed the oil filter to see if that was the problem. it idles at normal pressure per tm I have recently changed the sending unit and it is the correct one being I have the 120 gage

no the turbo is the first thing he checked. is there a port to find out how much boost the supercharger is producing?

I have a buddy that is trying to straighten out a wheeled apc that has theDetroit 6v91. the yahoo's at another shop that somehow changed the transmission in it and had the heads off the motor and who knows what else has been tinked with for some reason. so the the police department took it...

How much clearance do you have and what is your wheel base and how high is your bed? Mine has 5 in of clearance and a 54in wheel base.

What kind of cart do you have is it liftEd or stock. Do you have to find a Ditch to load and unload with it.

That is a great tool right there for this. Thanks a bunch. OK yall it needs to be 18 fthe at least 20 would be perfect for a little more than a inch of clearance at the top. The cart weights about 700lbs and I was thinking of using 2x12x20 layered 2 thick laged screwed and glued together...

How would I figure up the top angle from high center so I have the clearance?

Yea the cart is a old gas so it has plenty of pep for pulling a hill. The thing I am worried about is how long so they it will not hang up when it tops the bed and does not high center while loading and I was going to make a channel so they can't jump over the sides if I could figure out what...

Has any one made or know what I will need in length to build a set or ramps to load into the back of my m35a2? I don't know how long to make them or what boards I will need to make them work safely. The truck os still at stock height Any help would be greatly appreciated. Thanks again Thomas

What if i get a set of Pantograph wiper blade set up like on a Oshkosh or a big motor home? You know the one that has the fixed arm that makes the blade slide side to side instead of the radius of travel. Have y'all ever seen this done with a deuce I see the practical and the safety side of...

I guess i am on the hunt for a shorter arm just for that side. I had a original A3 arm and had the same problem with it that's why i bought 2 arms when i had to replace it but i thought it was just a thrown on there to get by but i measured it compared to yours and all 3 of the arms are the same...