Search results

I just bought a ring and legs in NC need to get it to TX anyone shipped one of these before? Who did you use? thanks

My M1009 runs fine for about 20-30 min but once it warms up it will rev really high before shifting from 2nd to 3rd or not shift out of 2nd at all. I have replaced all the vacuum lines and it did not cure it. I bought a vacuum gage and the vacuum pump is putting out the correct amount of...

I registered my Deuce in TX as a former military vehicle, used my bumper numbers for plates. You need to go in with the forms already filled out and pictures of your truck. The tax office will have no idea what you are talking about, took me about 3 hrs to get it done, most of it trying to...

OK, the batteries were dead. I charged them and started running through the trouble shooting steps from the -20. I have 24v coming into the alt but nothing coming out. I would assume that my alt is bad. The next step in the -20 is to replace cable 2. I am not understanding this, isn't that...

How much are these?

I had the same problem only no right turn or right hazard, replacing the turn signal unit fixed it.

Thanks guys, Ill order a new accessory switch and go from there

pm sent

By power switch do you mean ignition switch and if it was bad then wouldn't have failed to start even with the jump?

Went to start my truck and nothing, jumped it and it started right up but no power to any of the guages, do I need a new alternator or could it be something else?

and where can I get a hood handle to put on my deuce?

The rubber mat in my CUCV is worn out and after having a gallon of fuel additive spilled in it I tore it all out. Looking for comments from anyone that has had the inside sprayed with bedliner, did you do it all the way through? Start behind the drivers seat? How much off a difference did it...

Here it is, I imagine that I am going to have to take the heater and ducting out of that side. I dont use it here but it came on the truck and I hate to modify it.

Recovery4x4 here are the shots of the winterization kit.

=http://www.odiron.com/store/product_info.php?cPath=17_120&products_id=647[/url]

Ok I have read countless post on AC in the M1009 but have not seen any comments on the kit offered by OD Iron. Has anyone done it? If so did you do anything to insulate the firewall? I have the arctic heater kit can it be made to fit?

ERIK'S MILITARY AND INDUSTRIAL SURPLUS 25251 JACKRABBIT ACRES ESCONDIDO, CA 92026 760-747-8863 Hours are Monday-Friday 9-6. I don't know what else he has but he will send you a free catalog, customer service has been excellent so far, I needed some other parts he didn't have and he located them...

Decided to go with a new one, I don't want to be doing this again anytime soon. $724.13 delivered. And I was so planning on spending it on other useless upgrades that I just have to have. I thought getting my curio and relic FFL was the most expensive thing I had ever done but then one day I'm...

Medlog, PM sent, I decided to start with the deuce but will get around to putting the same thing in the M-1009. My list of wants far exceeds my check book but I will continue to slowly get around to it. As you get parts in for either vehicle please let me know.

Medlog, pmed you awhile ago about a light, never heard back. Do you still have any available?