Search results

OK I just noticed that the fuel line from the FDC to the head has a pin hole leak in it. Think that might be enough to cause the issue?

Why would lack of fuel cause EGT's to be so high?

Not sure what is going on here. Truck is really hard to start and RPM's are low until warmed up and still not power. If weather is cold I have to use starting fluid and still might not start. Today it started but RPM's are still slow and truck has no power. Will not pull in 5th at all...

To save the centers. torch the head of the revit , heat and punch out. Add the 3" easy to do works great.

Pull the hub, pack the bearings.

I think as long as you don't go on a militar base you are OK.

I have too nopics

I'm running about 35 on the bober with 10" wide rims. Ride is ok but it is like driving a 16' step ladder down the road. Thinking of going down another 5 to see if the walk will go away. 35 on the deuce seams about right.

I have 2 5.9's. One is going into a M715 and if the other runns it will go in the M35 with the Allison behind it. One motor is from a dodge PU and the other from a Kenworth box van. Parts will swap from motor to motor with out any problems. Dodge had a normal bell and normal motor mounts while...

Went for a drive today in the 100+ heat and saw a strange looking deuce. Thought at first someone had modified it but I think it is original. 1952 M44 Studebaker gasser. I saw the tag on the bed but forgot to look to see what it was. One of thoes moments. How rare are they. I only had the...

This will give you some tire sizes. Army Military Tires

OK, you have some for sale?:drool: I don't have cash but do have parts to trade.

CMP has new limit as of April .30-06 LIMIT - 10 CANS TOTAL PER YEAR - Effective 10 April 2009. .30-06 LIMIT - 10 CANS TOTAL PER YEAR - Effective 10 April 2009.

Thanks for the ideas. Used an ease out. Sprayed with REM Oil, tapped it in, turned a little and out it came.

OK more info on the centers. Do they mount between the shell halves or weld in?

Neck and half the shell. Nice thing is I can take the barrell off.

No this was one of mine. I have 2 in 308, one in 8mm, and one in 30-06. I finaly found a good place to go shoot Bill's M2HB but my truck does not want to run right. Just my luck.

Wish I had the cash to get that much. I just bought 1,000 rounds from CMP. They went up $7.00 per can right after I bought mine. What is a good way to get a broken 8mm shell out of a 1919A4? Shell split in half.

I have been running 395's for a couple years. I added 3" to my stock rims which kept the sidewall from bulging. I never could get the ring on the stock rim w/o pinching the tube. I noticed a power loss. On flat ground the truck would haul A** but pulling any grade it would loose power. Fuel...

I was using a 350# pot. http://www.steelsoldiers.com/conversations/13585-sandblasting.html I would recommend a fresh air supplied respirator if you can get one. I did not have one and the dust did leak in some times. Heat was also an issue. I bet I drank 100 gallons of water. I bought a...