Search results

Check the check valves going into the air tanks (primary tank especially) they rust up i had a slew of problems it was all check valves... derrick too much air pressure is either the govenor or the signal line that tells it to stop the compressor

My M923 read high on the temp gauge, laser said 160 deg. I changed the sender then the gauge, still read wrong. I installed a mechanical gauge ...much better.

I used a dual pto off of a m817 to run my wetline. Turbo was then a necessity after i started pulling heavier loads. Worked great for local dump trailer work.

I just got my M929 home. It was run out of fuel. I bled the fuel system and it started right up and ran perfect. It was refurbed 3/10 and never used. All the lubes were full and crystal clean. The only glitch is a leaky heater core. Ive said it before, i hope i can say it again "its nice to...

When your towing a m939 series truck why cant you just put the t-case in neutral ?

nice looking truck gotta love 'em

The prices did go higher than i was happy with but the truck does look nice. The other 2 trucks i liked would have gone a bit higher , so i figured i'd take this route. Im hoping its not a transfer case problem. i guess ill find out soon enough :cookoo: I also hate the fact i have to wire...

The descripton said "towed on to lot" so im bracing for the worst. I have plenty of spare stuff once i get it home so it wont be too bad, no matter what it is. Caging the brakes to put it on the trailer will be a pain if it doesnt start. Im prepared but curious....

I just won a m929 dump at New Castle,DE 11001/5189 towed on to lot can anybody give me a heads-up what might be wrong with this truck before i ride down with a low boy trailer any help would be appreciated thanks ted

subscribed

I've put all 4 of my 939's in reverse while in low range MANY times. I didnt abuse the trucks while doing it. Ive backed a loaded dump trailer (80,000 lbs) up a(very tight ,very technical) slope, stopping and starting. I've backed my m932 shorty up a 25 ft high embankment so steep it lost...

How much boost is it making?

Hey Brad, did you ever get the boost gauge installed ?

I've had 2 of my trucks that wouldnt wind in , both were cable adjustments. I dont like how short the slot in the console is either. There is alot of throw to wind out and not much to wind in. I lenthened the slot on the wind in side and readjusted the cable and it works great. They are...

Nice job. Truck looks great. Looks like you having fun , the turbo and some more fuel is gonna make that truck run alot better. Im glad your happy with it.

Bigger turbo and a different button in the pump. The 335 is a great engine. Call pittsburgh diesel, they'll set you up. I had one in an autocar dump ,480 HP pulled like a monster. I worked it everyday.

Im glad you got it done. Everytime i tried to put the top half of the rim on it would push the o-ring out, not all the way around only a little spot. When i greased it the top half of the rim slipped over the o-ring. Your way is alot less messy.

I have a rim like that. I couldnt get the oring to stay in place. I was in a hurry so i put the rim out in the barn and used another style rim. My buddy came up with a spare that leaked, we tried a new black o-ring with WADS of grease and it sealed up. Its a pain in the a$$ set up but we...

Nice