• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. C

    MTA Swapmeet 2016

    Had a great time found parts we needed and the golf cart saved my back. Very well run and comfortable atmosphere. Only Complaint SSG Gibbs was the only vendor you could not chisel down but still fare on his merchandise.
  2. C

    Hello from New York

    Hello from Wurtsboro NY dam great site
  3. C

    1974 m51a2 Colors?

    When we wore the uniform you had to follow the rules. Now we have a choice to personalize it toward your liking either way its a signature of your vision.
  4. C

    Tire tread life

    75,000 miles on a NDC tire???????
  5. C

    Need 816 hoist motor at Sussex

    Want to see if anyone has a serviceable hoist motor or rebuilt . Tried a couple of takeoffs main shaft rusted could not get the O rings to seat properly . It seems if they sit to long the upward pitch on the motor takes in water and rust the shaft. Appreciate any replies Scott
  6. C

    MTA Swapmeet 2016

    Its always about the money! see you at the show
  7. C

    MTA Swapmeet 2016

    JJB Yes it will fit in my locked building perfectly when do you want to drop it off
  8. C

    MTA Swapmeet 2016

    I agree a second show
  9. C

    Two-unit caterpillar conveyor Vityaz

    I wouldn't want to be the one to recover that out of a mud pit!
  10. C

    813 nhc 250 cold start issue

    Make sure you bleed the primary pump completely and check the o rings on the pump. Mine was worn out installed new primer good to go. Good luck
  11. C

    Anyone swapped a fuel tank for a toolbox?

    Removed pass tank made open 2 inch screen cage for chains and straps and other stuff needed. Usually close to home if need more fuel put extra cans on.
  12. C

    Has Someone Really Built This?

    P.retty neat back duals to close but I could see building it after getting lottery check cashed
  13. C

    816 dash wiring

    On the last step of rebuild of the ole wrecker doing the cab interior one question the gauges have a raised rib on one terminal on the plastic gauges is this the hot side. My brother dismantled it and at one time the harness was repaired with different number wiring which I sorted out today...
  14. C

    Coating Data plates

    Thanks for the replies Scott
  15. C

    M818 added to the fleet.

    Good luck with the new iron. I am wondering how it towed let us know.
  16. C

    Coating Data plates

    Renovating the inside of the cab got tired of running paint on dash.plus had to rewire underneath dash. Screws were rusted had to hit them with center punch and work them out with penetrating oil one came out with a screw driver. Cleaned up all the plates some our dull want to clear coat them...
  17. C

    I have the itch for the five ton

    Welcome and enjoy once you get the truck your wallet pocket will be extremely itchy and thin. Good luck
  18. C

    Why is finding this pipe such a pain ?

    Went up to quarry pipe was rotted through good luck on your hunt Scott
  19. C

    Why is finding this pipe such a pain ?

    There is a 54 up at an old quarry by me. I will take a ride up if it is there I will cut it out and let you know Scott
  20. C

    Cold start relay 816

    Anyone have a source for these it is a simple relay appreciate any help. Thanks Scott
109,390members
164,355threads
2,313,036posts
739online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks