Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Found this on this site.
http://www.hummerknowledgebase.com/general/sfhmmwv.html
I think I found TM in regular manual when I was researching this model. I am still looking.
Will send if I find it again. I spent quite a few hours looking.
Unicorn is what you have from information or lack of...
S-788 variant shelter carrier or 842 electronic shelter with winch and CTIS. I'm sorry you had to pay so much for it. HAHA I was after for same reason.
Right behind seats is shelter front holder setting on isolaters, same as rear, extended pintal
I'm not home to measure 1101, but if I recall correctly 8' 5" or so with S-788 on it.
The 1101 chassis is torsion suspension (or old one I have) I think this may be a bit taller than the 116 trailers
Of note I run 12.50 x16.5 14 ply truck tires on Hmmwv rim which lower overall by about 2" so...
That is the hard part( lowering) you can remove fenders and put S-788 or s-250 they just ride on top of frame like my ealier pic. No real way to lower I am just shade tall to fit in 8' tall garage door
I have s-788 sitting on the 1101 version of generator trailer and it fit between fenderswith...
The S-250 will not fit betwwen fenders of M116-A3 without modification I added 2x3 square tubing between fender plates and frame widened just enough for about 3/4" clearance on each side
I won the same shelter with different outfit inside. Mine was a comms unit. Had all the equipment that came with your except for the control panel. A guy on fleabay has control panels, but I am NOT paying the $1000-1300 he keeps bouncing back in forth on. I have a DSE controller going to use...
They used a metric sized filter 16mm in their custom machined base and only had one mfg that made them and they got bought out and no longer mfg. Ingenious actually, lots of one off parts so government was forced to buy spares from them. I switched mine over to a racor r12t filter like the...
Typically 3 phase motors are usually tapped (9 lead ) where you can configure them for 3phase 208v or 3phase 480v. Single phase motors are typically 240v with sometimes being able to be wired 120v with twice amp draw. Never seen one that could be wired as either 1 or 3 phase.
That being said...
After I changed the fuel filter in mine I could not get my 813 to prime. Little pump on dash worthless for whatever reason on mine. I ended up using my air compressor to pressurize fuel tank. I removed return line, put rubber end on air chuck and pressured take through fitting that return tied...
Funny thing about TWIC card when it was implemented (2007ish)$125 good for 5 years. Payable to Raytheon Crp. Gov farmed out or created yet another kind of "tax" paid to 3rd party. I agree with having the background check but interesting gov contract there don't you think?
Place is incredible...
A TWIC card. Transportation workers identication card will get you on quickly. Workers who access areas where customs is required among other places. I have to show mine to fly out to Gulf of Mexico PDQ.
It it is an amazing place. I wish the would just let me wonder around just to get close...
I bought a GETT unit that has its own built in 6kw and 4 kw load bank. I just use plug from 803 to Shore power receptacle and load up. Didn't even know it had this ability until already bought it. Love that gen as well. It is a turbo charged version of an 803. Never can go wrong with turbo, plus...
I've been lucky on my 80x's that I have bought so far. Had way less luck with the 831's. I've had to learn my lesson hard way on buying stuff out of reasonable driving distance. Often cost of shipping exceeds "bargain" I won at auction. Takes the joy out of purchases stressing on logistics.
Be a good way to give your new toy a workout/ shakedown without investing a great deal until tested. If you are like me you want to blow cobwebs out sooner rather than later. Would love to see YouTube video of it as well.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!