Search results

I don't want anything turning until I have oil pressure.

Let's try this again.

I don't know why it's so blurry.

This is the page from the TM.

I'm ready to start my wrecker after replacing the #2 and #4 pistons and liners, the truck has not run in almost a year. I have read the TM about how to prime the oil system but I don't have the correct pump it calls for so I'm going to use what I do have. Anyway, what I was wondering was, does...

My power steering.

I already have power steering and would love to do hydraulic assist, just don't know where to tap into the box.

I'll add the other 1%, they are all in the M915 series of vehicles.

Papabear, did you get my pm?

I bought my M915 sight unseen from GL, then drove it 2,500 miles home. Would I do it again? Probably not, but you never know:driver::driver::driver:

Not bad, especially with the little fuel issue you had on the trails.

Got one at the Ga Rally, one of the best mods I've done to the truck.

When I pulled the bent one out at the rally, the tires were toed out, the 5 ton rod went in with the rod ends screwed all the way in, so once the toe is set it will be about the same as the deuce rod. Everything is bigger, that's why I couldn't just swap the rod onto the deuce rod ends. The nsn...

I have 5 tons, this is for my off road beast deuce.

At the Ga rally this year I bent the tie rod on some rocks, with some much appreciated help I got it straightened back out enough to get me home. Now, what I want to do is put a 5 ton tie rod in its place, mainly for 2 reasons. 1. They are stronger. 2. I already have several of them laying...

The wife and I made it home, then back to D-town to pick up the deuce and M105 we had to leave behind and back home again with only a minor hiccup with the deuce. The bolts I put in place of the studs i broke on the top of the left knuckle last year, started backing out and the steering kept...

I'm glad you got a pic of the hood lift kit I got from BBQROD. It was a quick and easy install and definitely one of my favorite mods to the truck. I would call it a must have!

I locally manufactured mine. (Built my own)

Anybody know where to find one of these? All I'm finding is the type wreckerman posted.

As usual, life has gotten in the way and I have not had the chance to get this thing pull worthy, I have taken it apart and built 2 new ribs for it, just need to weld them on, and still need to figure out what to do for an axle. I'll try to have it done by this years rally but can't promise...