Search results

NecroPost CPR: MTS-2011 Start up Manual: MTSMUV2MT2011 Satellite Modem User Manual MTS User's Manual Comtech EF Data (fccid.io) Part 2: MTSMUV2MT2011 Satellite Modem User Manual MTS User's Manual Comtech EF Data (fccid.io) Part 3: MTSMUV2MT2011 Satellite Modem User Manual MTS User's Manual...

IN

A different GMV with 28v Dimensions 120v AC Inverter: The small problem with the source material is, it is not organized as a "Walk Around" of each individual truck as a separate file. Most of the trucks are M1025A2 based, about 1/3 are REV/ECV based GMV. We have one SME who had one of...

Is that a 24v Map Light out of a VW Typ 181 Thing or Typ 183 Iltis?

The confirmed original GMV photos I have that are clear enough to read the inverter labelling indicates both 14v and 28v inverters were mounted in that right rear ceiling position. There is the visible plate top top the roof sealed all around with silicone as well an another interior mount...

The Ibistek lowerable Spare Tire Carrier, a guy named Daniel Urban in HMMWV Group on fascistbook has already made a few replacement brackets that are often missing from the Ibistek. If you still want to build the brackets yourself I can make a basic sketch separately.

Welcome to HMMWVs, Jr. Good luck with the troubleshooting on your TCM. There are several versions of that TCM each with different shifting points based on speed and the truck variant/GVW. I think eventually, every single task in the Organizational and Direct Support TMs will be found on...

Milemarker Hydraulic Winch uses the yellow plastic handled 3 pin cannon plug controller. Part # 12469356-2 NSN: 6150-01-475-8835 The A0-A2 HMMWV Warne electric winches use the black rubber coated handle with toggle switch, and square box 3 pin connector (looks like for the Cadillac Valve...

AKA Rear Fender Housings, nothing to do with guitars.

Yeah, the TB installation instructions tell you to wire brush or sand away about a nickel or dime-sized area around the bolt holes on the outside of the wheelhouses, brush the paint off externally dimpled bolt points on the antenna mount itself, then apply dielectric grease between the antenna...

I know the front steering arm is a massive custom part from Moog, its even bigger than the M1165/M1152 steering arm. I haven't looked close enough to see if there is a mfg part number on them.

There are some Fox Remote Reservoir Expanded Capacity Nitrogen charged shocks on the market that are not priced too badly. But the big money is going to be in the attachment hardware. There are machined barstock brackets as well as welded plate brackets welded to the A Arms. The front are...

Milbot on ebay has over 10 NOS DWF Exhaust Pipes for $400 each, including shipping, cheapest I've ever seen them, and you may be able to offer 15-20% off the asking price...

I bought 2 M113-series domelights that I am going to attach to the interior backer plates for the LVOSS Launcher Mounts, so both Driver and Navigator have white/tactical illum.

I'd recommend only buying if you can inspect yourself beforehand. The M1097A1 I bought, GP shot photos from certain angles to hide damage to the RH wheelhouse. They are just a government-contracted used car salesmen, an even worse form of used car salesmen.

Speaking of the Cancel Rings, I have 2 trucks both have at least one of the pins broken off the Cancel Ring. I'm ordering some black zytel nylon round stock in 5/32" and 3/8" diameters to replace the tips, considering the price these Gosh-Darned things have got up to, if you can even find them...

Is there an AMG Part # on the pigtail tag by chance?

Most of the line unit HMMWVs I've seen, if they left the factory in Camo Green 383, the interior stayed that color while the outside were painted in the CARC Tan 386 for deployment.

I spent most of a home station AT with 550th MI Bn, 78th ARCOM, hand-painting the MERDC pattern on M35 and the Mil Van version and some CUCVs. All they gave me was a very bad grey scale copy of the TM page, told me to just get it as close as I could.

I believe the attachment screws are a #10-32x5/8" self-tapping Screw, Tapping NSN 5305-01-3615-353 Part 9414241, my local Ace only had 3/4" so that is what I used and the tops don't interfere with the wiper system. You apply liquid dish detergent around the gasket them gently push it into the...