Search results

He did join the club in May. The ammo trailer did not go with it, he has no place to store it. It is still for sale.

Yes it will...

I am glad it is going to a good home.

Welcome!!

I just use a strap wrench to get them off. When i fuel up I use a paper towel to cover the hole a round the nozzle.

I like that welder!! LOL

I would put the ground for the welder close to were you are welding.

A little, you may have to unbolt the drive line brake cable mount to get the valve to unscrew. It is close work up on top of the transfer case.

I had the same problem on my M936 and it turned out to be the valve on the top of the transfer case. The valve is the one that keeps the shifter in place and when you push the button on the shifter it releases so you can shift the transfer case. The lift pic is of the valve and the 2nd is of the...

I run all my axle vents up to the front of the fire wall. I just linked the all together.

I think it would be easier to pull the motor with the transmission also.

I understand your pain. When we pickup my M936 with the 11x20's we could only get 65psi in the tires and on the way home I hit a bad spot in the road with a lot of ruts in it. It was not fun driving it for about 4 sec. The truck started rocking back and forth. Now I run 90psi all round.

I have had good luck with the Raptor bed liner and you can tint it to the color you need or just use the black. https://www.amazon.com/U-Pol-Products-0825-RAPTOR-Black/dp/B00NOIKSPC...

You do not have to remove the steering box to get the injection pump off.

Nice Truck and lots of BII to go with it!! Wreckers are cool and useful. I have used mine a number of times, pulled a motor from a truck, put my S280 shelter in and out of my M923A1. But it is heavy, be safe and have fun!!!

You can get the U-Pol Raptor that is tintable, then had a car paint supply house mix up some tint for you. I did that on a Deuce I did. I sprayed it on the cab floor and the bed floor. Worked and Looked great.

You can get the little Schrader valve at most auto parts stores.

Is air leaking out the bottom of the air dryer? If so just push up on the center of that is in side and it should stop.

I think I would replace the Alt., I'm thinking the shift will brake off in time.

You are never done them them, always something to do to them.