• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    power cable for VIC-3

    I said what it is above .
  2. 86humv

    power cable for VIC-3

    If you have this tray.....Red circled wires go to batteries.....yellow is Vic3 power. 2 contact end on Vic3 : A=+24 B= -24
  3. 86humv

    power cable for VIC-3

    To power the Vic....you need a MT-6352/vrc radio tray and its power cord which goes from the left conn. to the batteries. Then the CX-13468, or A3206017-3 cable which goes to the far right connector.
  4. 86humv

    10K vers 12k half shafts (size)

    There are 12k shafts for solid, and vented brake rotors.[ different rotor end.....vented has larger circle between bolt holes ].
  5. 86humv

    Noisy heater blower / fan ??

    If you find you need one...I have one available.
  6. 86humv

    Replace half shaft bolts?

    Clean old bolts and add red loctite, and the nord-locks.
  7. 86humv

    What have you done to your HMMWV today/lately

    What part ? The roof is one piece, other than the mounting components.
  8. 86humv

    Southern Metals Wilmington NC Humvee parts

    TucsonVTXF You got some good stuff there. Why didn't you buy a later drive train with a 4l80E ?
  9. 86humv

    6.5 W/ Over Drive vs 6.2 W/ 3 Speed

    I have some takeoff plates... 05-99 = 184xxx 06-01 = 195xxx 01-06 = 230xxx 06-07 = 251xxx 10-07 = 259xxx 02-08 = 264xxx 11-08 = 312xxx 11-09 = 331xxx
  10. 86humv

    6.5 W/ Over Drive vs 6.2 W/ 3 Speed

    It looks like a data plate from the reset, which might be the reset date. This one below is an example of a AM general produced data plate.
  11. 86humv

    6.5 W/ Over Drive vs 6.2 W/ 3 Speed

    The original delivery date should always stay the same.....but some reset places put a new date on a new main data plate when they reset it which is wrong. The new reset date is normally on a different data plate if they did it correct
  12. 86humv

    6.5 W/ Over Drive vs 6.2 W/ 3 Speed

    Easy to see the date code on the back of the motor. Right side below head on block. GEP's date starts as numbers then letters, an " H " for 2001, or J, 2002, K, 2003, and so on.....L, M, N, P.....etc. No code I, or O. So...11 03 L is a : nov. 03 2004 cast date motor.
  13. 86humv

    Humvee 57K4387 tubular bumper/brush guard

    They are steel...I have some with brackets.
  14. 86humv

    M998 Tailgate Spare tire carrier

    I have one of the Gypsy rack tailgate style available with 2 gas can mounts.
  15. 86humv

    M998 Tailgate Spare tire carrier

    That thing looks dangerous.....all the weight on the bolts in a shear condition...no thanks.
  16. 86humv

    Major electrical problem

    There is no reset.....check them with an Ohm meter. If good, they will read through. Sounds like you need a new box.
  17. 86humv

    M1123 engine blocks chinese?

    I called Melton...they said no chinese blocks.
  18. 86humv

    tachometer box

    That one has the hour meter.....most I seen, and mine only have tach.
  19. 86humv

    Windshield rubber

    For the spiral type glass.....:D
  20. 86humv

    Starter Boxes

    Yellow label KDS and SSI box...P.N. 12469158-1 , nsn : 6110-01-470-1931 Green label KDS box P.N. CR2699, nsn: 6110-01-491-2142 White label /Green box: KDS or Nartron P.N. 12480779 or CR-2701, nsn: 6110-01-542-7901 .......................................... TCM : Yellow label KDS or black top...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks