Search results

As to why I am pushing this is most of you including most who have met me don't know that I am a walking miracle. I have been paralyzed from the waist down and was in a wheelchair for 6 months and I am very blessed to have had a second chance to walk and do most things that I want to. So yeah I...

Grab the brake lever and cable off a bike and run the cable down the shifter and to the throttle on the pump you can leave everything as is and hook it where the hand throttle is now and let him try it out in a field bet it works great. You guys that are being naysayers please stop. This is a...

PCB is the black box on the firewall. Screw in, is over ride. Screw out, is normal operation.

They don't explode but they will sling a rod out of the engine.

Please don't run 75 mph in it unless someone changed the stock gears out, it will blow the motor apart.

PM military bogger he should have the numbers

Learned a long time ago to never say it wasn't ever done to a military vehicle but have seen lots of the 939 series trucks and haven't ever run across an air shift pto or a married pump and pto.

There are lots of hand controls that could be made to work with the M35

Clutch or brake leavers off a bike could give him the control he needs. But power steering is going to be needed if only one hand on the wheel. Or could you reverse the pedals to put the gas on the left and let him clutch with his right? This is not got to be something that will keep him out of...

I have driven a 6.2 with 465 with 35" tires and loved it also have pulled a few 465's out of blazers so it all fits nice, go for it!

Can the exhaust be moved? Looked at a few frames and doesn't look to be any difference on the cut out.

Spicergear I am not trying to say your idea is bad, use the heck out of it. But I have broken several of the 20,000 lbs Garwood winches and the fairlead doesn't add any support across the front and it will snap the small rollers off if you pull very much at all to the sides.

I believe that he Was talking about the rear being different.

Read post 34

Yeah it has been done, i forget who.

Okay the pins if he uses tow bar pins will hold almost 90,000 lbs I think he is good there and as to bumpers look around at all the crap the pickup truck guys have on front of their bumpers. But I do have a critique to raise, these winches spread very badly when boxed in by the frame luckily...

Aren't they the same as the M101?

The primer pump just has an O-ring to replace but sometimes you can just tighten it a little bit and or put a little silicone grease on the shaft to get it to seal off better. Also check the plastic line going to the primer pump they are often cracked. And yes air will make it slow on the...

I can get take offs for 500 each. And yes it is hard to get them in place, most people have been dropping the transmission to get them in place.

Okay if Bunkerbuilder (I am guessing that is what Doghead means by BB's) has said something out of line then delete his post don't shutdown the rest of us.