Search results

Bjorn, stay away from the fluted SnapOn things, unless you like to use a die grinder and/or have access to a laser cutter. I'll give you the set I have. They are not so good. Jones is right. The LH drills work great. I'd try that 1st. Start small and work your way up. The heat generated by the...

Or maybe M291

Ernie, are you thinking of the M292 expansible van?

M105A2, but it's only rated at 1.5 tons.

Yeah boy, I tried to do mine with a die grinder at first. Those things are brutal hard! Took them to a friend of mine, took them out like they were made of hot oatmeal! Forgot to say, took 'em out on a lathe.

RE: Which duece has the big cargo box and how available are The long bed version is the M36. A guy here just got one! Kinda rare I guess. Have you thought about using an M109 shop van? Patrick..OPCOM, has one and it's fitted with a whole lotta radios! Maybe he'll chime in with pictures. It's...

Thank Tom. I asked this 'cause I put the "new" trailer cord on the trailer today, used but never on a trailer. Had a couple lights that didn't work..including the b/o brake..no vdc. Fixed all except the b/o brake..grounds, who woulda guessed?. Pulled it 10 mi, stopped at a friends, no lights at...

RE: Another deuce brake problem I didn't check the Saturn site. I'm all over it! lacoda, the brakes still work w/o air, just not like "power" brakes...no boost. Coulda sworn it was a MWO. Thanks guys.

I think it's in the 361-10?

My brake lights stopped working today. The switch is still at the end of the air pak. I am having CRS real bad today, I know....no, think.... there is a MWO to move the switch, but I can't find it. Again, TMI for this stuff, i'm starting to get it confused with work! Anyone know where it might...

That's amazing! We posted almost at the same time about the same thing! Kenny copied a link in response to my post. Visit that post, Trailer recepticle pin out, and if you know what pins are A, B, C, etc, let me know.

Thanks Kenny. Now, which pin is "A", then "B", so I can have a reference point. The plug on mine has no IDs on it.

I've been looking thru the TMs I have and can find no diagram of the recepticle pinouts for the trailer plug. Just wanna know what pin is what. Anyone have or know where to look?

RE: solder job complete Sweet. Hope they last longet than Norms.

I forget, can we link directly to a site??? Oh well. Bjorn, this guy runs ad in MVM. If the coating is anything like "Kreem" It will last a very long time. When I worked for Kawasaki USA, we used Kreem on rusted motorcycle tanks. It worked great. Try this. http://www.gastankrenu.com/

Yes, class fit parts can be lapped to be renewed. A very fine crokus cloth with the edge taken off and diesel, or Clover extra fine compound will do the trick.

RE: Re: RE: Re: RE: It I only pulled it a mile or so. They'll be fixed b-4 I pull it any farther.

Sounds like a fuel pump governer issue? When it idles fine, what speed is it at? It should be at around 850 RPM.

M1009, or M109? Two different beasts, you're in the forum for the 109 :wink:

Re: RE: FNG considering an m35 purchase. What are the essen Gimpy, I agree. I have had the pleasure of meeting about 10 of the guys from this site. They are some of the finest examples of the human race. I've also had the pleasure of meeting and hanging with about 100 or so SCMVCC members...