Search results

I got hacked off one of those pages recently. I found the former pillar for the soft top on my hmmwv. Found it on this website for super cheap with free shipping. Never got it and then a couple weeks later my card was charged several times from all over the country.

I had three website windows open, each with a different vendor including AMG. I added parts to each vendor because prices or availability were all over the place. But several items on AMG were priced quite reasonably compared to the others. I have been happy with their items so far. Shipping was...

Put some new paint over the old sheriffs department stuff.

The Gear Report truck did not have a fire, but was covered in mildew. Pressure washer and some cleaner and its glistening lol. But water issues do seem prevalent out of the Albany GA location. Ive been told it runs fantastic now after some trans work.

Got it cleaned up and mounted in the LMTV. Sold the truck to a guy interested in converting to an overlander. Not sure of his progress to date.

TM-9-2320-280-20-2.pdf (steelsoldiers.com) SKIP TO PAGE 705, STARTS THE BRAKE SECTION

POST UP IN THE CLASSIFIEDS, PARTS WANTED. YOULL GET MORE RESPONSES IN THAT SECTION.

Actually, alot more. Given the amount of logging in the area, not to mention us rednecks with transfer pumps in the bed.

Would be next to useless for my purposes, not a lot of chargers in the woods.

If you do not have a light installed already, then yes you will need to install some. The taillight will not turn white like normal cars, or at least i have not seen them. A cheap set of amazon led fog lamps works well. The neutral switch, like I used, in installed in the shifter mechanism...

Around my local are, some inspectors require the vehicle be handed over to the inspector, so for mine I wired it to come on when put in reverse. The switch screwed right into place in the shifter, no mods were needed outside of tapping into the wiring. I tapped the service light because I always...

https://gear-report.com/?s=battery+charger lots of options with installation information here.

https://www.steelsoldiers.com/upload/M998/TM%209-2320-280-24P-1%20HMMWV%20Parts%20vol%201.pdf The hubs can be found in many places for sale. Several surplus guys on here that can help you save $. Use the pdf file for parts and the other pdf's for maintenance. Alot of information in there.

https://www.globeworks.eu/mounting-bracket-gas-spring-cargo-door-Slantback-HMMWV https://www.hummerpartsguy.com/BRACKET-HATCH-GAS-SPRING_p_18411.html

Not sure Ill be much help, but my gaskets do not have that profile in the corner either. I have an LVAD, so it may be different style.

What is everyone's main source for the fuel lines?

I used 1" thick, closed cell phone tape about 1" wide as well. Ran that all the way around and overlapped with a bit of silicone in the gap to ensure seal. Put a dab of sealant on the bolts as well. Has not leaked since. Incidentally, it had the original 1/4 thick rubber strips with matching...

Mine does this on occasion as well. 3116. I replaced the primer pump and filter, ran across my lines visually to look for seepage while it isn't running, no cracks. My brother in law that works for cummins suggested it was an injector oring leaking. It does seem to happen more often when it is...

Finally replace the passenger side front windshield in my airdrop. Had it for a year almost. Was pretty easy to put in. Can't believe I waited that long for it to only take 10 minutes.

Is Jim Henrys business open during that weekend? I have never gotten down there to check it out yet, and I wondered if I could go by on that Saturday.