Search results

I would check the vent on the firewall for obstruction. I had a similar issue turned out the air in the booster was not releasing fast enough. Every time I use the brake I had to wait a second or two before I could take off again, brakes would lock until enough air from the booster was released...

Possible could be coming from slobber tube off of the air compressor.

Everything came as a kit mounts and all bolts, wiring everything all I had to do was install it.

Well I did manage to get the winch in the back bolted in today. So now I can load those big heavy 11.00 x 20 spare tires in the back by myself now. It got dark so the wiring and controls will have to wait until tomorrow. I also got the base today so I was able to finish installing the new...

I found this solution to be quite effective. Dual systems 12v & 24v. This dual system from scratch costs about the same as a replacement military alternator. But these alternators put out much more amps. they are much cheaper to replace or rebuild in the future as well.

To be honest I am not exactly sure yet. My basic idea is as follows. I bought a 2 1/2 ton ATV winch from TRC for $80. I will be mounting it in the head of the bed just below the head ache rack tomorrow. Its a very small 12v winch. I have a dual alternators on my deuce 12v and 24v system. I would...

I have rebuilt the Garwood winch that is installed on my Deuce. I did not use a TM to do it. I did it by seat of my pants, actually very simple to do. One issue will be the removal of the two key stocks in the shaft to get the drum off they are a real bear. I finally took it to a machine shop to...

I work in the Oil Field and I can say with absolute certainty that water weighs 8.33 lbs per Gal. Thus 4500 Gal. H2O = 37,485 lbs or 18.7425 ton

Well I made noise when I went to buy more parts. I got an ATV winch which will be installed in the back to help me load heavy things that my old bones are to tired to lift when I am by myself and a new seat for the passenger side. I am also in the process of getting the pieces a few at a time...

I have full coverage with roadside assistance through progressive insurance. I have used it twice to get jumped. The first time I used it was in Colorado when I first picked up the truck. it was 25 below zero and sat all night and that morning when I tried to leave it would not start. I thought...

I am going to try my best to be there.

Part of a bunker buster maybe.

Hahahaha powder coating sounds nice but my poor truck I do thousands of dollars in work and the one thing I really needs I don't do PAINT poor thing like new every where else but then paint need attention I will get to it eventually but I figure its a beast so paint can wait for now. all kinds...

I thought about 395's but I got the 11.00x20's for $100 bucks each so I went for it since I was able to use existing rims rather than having to pay cost of 395's and buy MRAP or Hemitt's with adaptors.

Good to know. Just wanted better tread my 9.00x20's are bald and I hear tell 11.00x20's will gain me 5 or so mph to speed.

Got my new 11.00x20 tires today 99% tread will getting then installed tomorrow or Monday with new tubes and flaps.

I am sorry moderator I did not mean for that to be a link I was just trying to copy and paste the Part # of the plug.

Mre Heater Power Plug needed is an Amphenol MS3106F16-10S MIL-DTL-5015 it can be found with internet search run about 20 to 30 bucks. You then need SO cord 14ga 3 strand cord. a soldering iron. Plug wiring is as follows. A=22-28 v positive B=Ground C=Not used Also if you want a manual with...

Thank you masked stranger LOL. Can you share how I might be able to do that on my own in the future.