Search results

Yes, it's available... Christian

It goes nearly down till bottom of the bumper, to cover also the 2 air inlets. What I like is that I can flip it up to get some air through the radiator if temperatures rise. Plus I do not need to rise the cab. At that temps I prefer to be fast. At -30C engine temp is around 95C, at -10C I can...

Not the nicest hack, but works for me: It's a thermo cover for windows, punch a few holes, few cable straps and you're done. Worked for me also at -30°C, and you can easily flip it up if you are on highway and engine get's hot. Christian

Thank you sir!

Deleted due forum roles. Christian

Nice mod! Christian

Thank you guys! Christian

Hello forum. Do you suggest to block the air ride system when doing heavy offroad, like on steep hills / dunes? What else you would do when crossing a sandy desert zone, except air pressure and 4wd mode engaged? Christian

Thank you sir! Christian

You can let the 150psi sensor in, it's not a problem. But you need to change the mode presets to read the correct value from the transducer. Since my ECU can set 4 diffrent pressures you can put almost every pressure per mode. Easiest thing is to inflate / deflate the tires to the right...

No, the arduino reads the value from every transducer, what change is the value compared to the pressure. Christian

Very nice! Well done!

Yes, definitly.

Yes right! Sorry about my bad english. There's a TM about the winch maintenance, but nothing about the motor. Seems it's not serviceable, but I can't immagine that a hydr. motor is not serviceable. What I don't understand is why leaks when winch is not in use, and under load it's almost the...

it's not the valve on the hydraulic motor. It's a small valve with a spring inside, quite easy to grab with 2 fingers and pull out the pin. it sits on top of the winch friction enclosure, near the winch drum, not on the hydr. motor.

The valve on top of the winch? Thatbyou can pull out with 2 fingers? But it should not completely full with oil, only 2/3 right? so I do not understand where the oil came from and spill out from there. Or do I not understand the function of this valve? I thought its's to compensate the oil/air...

Hello forum. My hydraulic winch motor leaks. Oil drops from time to time from the safety relief valve, also when winch is not operative. Did someone had the same problem? Or did someone open the winch motor and did some mantainance on it? Thanks for any help! Christian

Right, maybe they just push them down to the main dash...

Thank you Ronmar! I think we should test it on a A1R, Third from Texas wrote me and I will send him a unit for testing. Right now is difficult to find a vendor for the MIL plug, but I will do my best ;-) From the schematics I am quite sure that the important pins (solenoids, wet tank pressure...

Sorry for my ignorance, what should be connected to P912 and J913? Maybe spare?