Search results

I maybe interested on 2 , have a great trip and contact me on the way back 305-218-0640 willie

almost finish Got all the brakes levers and cylinders finish, need to finish rebuilding master cylinder and install new hose..

Good luck with your M925A2 , maybe picking up one my self tomorrow...

Yes i will, looks like we may be picking a M925A2 tomorrow so with in the next weeks i will do it with some pictures, i think its well documented here, more pictures will and more people that do it and post about it will make easier ....

We use to use a slide hammer which we welded a injector line nut to a bolt and screw in to the slide hammer, make sure you put lots off acetone with tranny fluid 50/50mix or some good blasting oil , they can be tuff.. good luck

Ok thank you i will once i located a vehicle, got my eyes on one near me, thank you again willie

Thank you for the fast reply, once i get a truck will install then and crack fuel up about 3-4 turns out, i think i understand that if not will read the thread again....:driver:

Got my GSK kit today , if i recall you keep the outer spring and seat which i think is the idle spring, you will replace the inner cup with the 2 new inner springs for 2800 RPM and if you want to bring it up to 4k you put the small spring supply {which i am not doing}, is this correct is what i...

Yes hopping my months end.;.

I will thank you

Well is being about a year and a halve since it broke a rod coming back from ALASKA, even do i had the new engine, machine work done over 6 months ago being busy on other projects, but finally got it all together, is a base 98 6.5 , with a IP 4911, should be picking up the turbo mid week is...

Yes sir thank you

Just order my GSK, now just need to find a clean M931A2 or M932A2 , LOOKING AT 2 IN EBAY,,,,,,[thumbzup]

Got it thank you

Thank you

Any body knows a good source for GSK springs thank you

This may help WM, when i work on a diesel shop we use to trouble shoot trucks that would run poor or where having starting problems of course they where 5.9 cummins so we had a fitting that connected to the PT pump set up in to a fuel can, we use to set it on top of engine and it would gravity...

Hub back together Well this weekend me and Robert reassemble the hub, and i think is was smart and a lot less work to go ahead and cut the studs from the other 3 wheels instead of taking apart the other 3 hubs as it looks like they where part of the casting, will mill the cut studs out and...

Its this going to have some military stuff for sale or its just get together with some trail rides..[thumbzup]

Very good info hooping to get a A2 zoom will turn up the fuel and maybe do the GSK , i have the tool for the governor springs some where from my 5.9 PT days will look for it thank you for all the postings ...