Search results

Anyone previewing there on June 3-4? If so, please shoot me a PM. There are a couple of items I have questions about. Thanks!

Here's the blow up from the parts manual: The copper spacers are #17 The piston seals are #22 The rubber shaft seal is #30

RE: M818 Sprag The other seal is the shaft seal. It is behind the piston. The nut holds the piston to the shaft. I couldn't get my piston off so the seal didn't get replaced. My problem was the 2 piston seals were dried out and loose. I can't remember what the price was from Memphis. I...

If you really want to slow your Mog down, put a load in the bed :) I hauled everything in mine from firewood to boxes of office stuff through the Franklin flood waters. The emergency crews were very impressed when I drove the last of my belongings through cab deep water.

Check your fuse block and other wiring connections for corrosion.

I am not a current M880 guy, but I will share how I clean out an engine compartment. I like to use something like simple green or purple stuff in full strength. I scrub everything with a stiff bristled brush and then rinse with low pressure water. I used to use Gunk and the like, but got...

What's a Cumings engine? LOL

Please post classified ads in the classified ads section, not in the forum. It is permissible to post a teaser in the forum with a link to your ad. Thanks.

RE: Unimogs Hi David. I had a 404.1 Radio truck or Funkwagen. They are typically cheaper than the cargo trucks. I took the box off and put a cargo bed on it. I off-roaded in it a good bit and the dang thing was pretty much un-stoppable. The only time I got it stuck was at Haspin, but that...

RE: Bidding on Deuce...couple of Newbie ? Welcome to the site. It is generally not a good idea to post about what trucks you are bidding on. Go back and read some of the old auction posts and you will see what I mean. As for finding out what kind of equipment is in the trucks you are...

It seems this topic has run its course. OEM and Jatonka have had a chance to make their points. Lots of members have chimed in on both sides of the issue. I am closing this one up before it degenerates any further. If you would like to continue the discussion, feel free to PM each other, but...

We are really happy for you guys! I hope everything goes smoothly and that you make lots of wonderful memories! So are you going to the reception in the 813?

Just needs a little TLC :)

Here's a few that I know of: USMC M809 and M939 series: Detroit Lockers rears CUCV Trucks: Detroit No-spin rear CUCV Blazers: Gov-lock rear

Yeah, the green one has been scabbed together on the front. It should have a grill like the red one.

RE: Robyn Sorry I missed meeting you in person Robyn. All I heard were nice things about you. The rain kept me pinned down close to home base for most of the rally. I did cruise for parts a bit with my brother and to say hello to other SS folks, but never made it to the other side of the...

RE: Re: I for one... Lanty, I appreciate your input. You have always been a logical and reasonable guy. I have tossed around numerous scenarios in an effort to make everyone happy, but as you can see, there is no perfect rule. There are even different opinions between the moderators and I...

RE: Well.... Seriously guys and gals. We have beaten this topic to death numerous times and I'm sure it will come up again. There are VERY passionate people on both sides of the issue. Some want absolutely no auction postings and some want to post any and every auction posting. This issue...

Hmmm, it may have to do if the NAPA store is a NAPA Truck Parts store too. Mine here in town is and they have the bottles.

NAPA has them.