Search results

Those are pretty old the glass could have turned an amethyst color from exposure to the sunlight or they could have been red at one time and turned that color from sun fade.I know a bunch of old bottle and antique insulator collectors who look for the clear glass that turned amethyst over many...

I used the 105 trailer springs on only one of the deuces I bobbed I built leveling blocks for it they were 3 inches tall.I used one inch thick stock beveled welded and then welded the wedge from a set of deuce front springs to the bottom of the block on both sides for the proper drive line...

I used this steering box from a ford F700 in my bobbed truck its powered from the pump on the 3208 cat thats in the truck now. The vickers pump in that powers the steering in that five ton will bolt to your deuce multifuel but I have recentered HEMTT rims on the truck the backspacing on the rims...

Thats why I just bought 10 gallons of the 383 green stage one CARC the good stuff. My friend painted his 818 with gillespie no complaints but he just bought a couple gallons of 383 green from me to paint his deuce.

Most bigger guys I know opt for the box style seat found in earlier trucks not as comfy but gives a bit more room.

I have four extra 831s on ten bolt rims just got them yesterday with 12 other goodyears.

I think the sheetmetal on blazers and suburbans is the same from 81-90.

They used a pick axe to drain the fuel tank in a 1009 I bought down in georgia.

I put a V8 in mine but its diesel.

There is a guy in marshfield wisconsin had a pile of them a few months ago PM me and I will give you his number.

Looks like its working. Half the time lately I think guys are doing it just to get a reaction.

OK sounds good to me I have a guy I use all the time too he is about the same rate sometimes they cut the rate a bit if they haul more than one from the same location.

Against my better judgement I bought a 1009 out of pineville today looks like a nice truck but if someone here lives close I will make it worth their while to get it off the base for me after the EUC clears.I bought three of them from there a few years ago and thet were pretty cobbled together...

Check the 10GA purple wire going to the starter check the ring terminal where it bolts to the starter for power I think its the S terminal. Have someone turn the key to the start position if no power check the wire where it goes into the terminal I had two that had power to the terminal but none...

One of my parents friends who grew up in holland said the squadrons of bombers went over their house at night on the way to bomb germany she told me the sound of them flying is something she never forgot.Last summer a B17 was flying around the area for a few days when the air show was near this...

Civi trucks had those splash shields put on them from the factory too.

Just a month or so a 57 utica bend and another studebaker went through GL at a site in south carolina this week a 62 studebaker went through GL at the same site I got mine from.

Just bought a 1953 studebaker from GL in louisana nice truck completely sandblasted and repainted and upgraded to a multifuel as well.

I pick the rear of my trucks up with a big loader at work to check them I guess any way to get the axle up in the air so you can try to move it back and forth would work.

Ticks were really bad here this year two of my brittanies tested positive for lyme disease I had to get all three vaccinated this year.Its surprising the ticks were the big dog ticks and not the small deer ticks that usually carry lyme disease.