Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
No matter what way I worked it out the extra gallons are 100 each plus shipping thats my cost with shipping and volume discount.I will have five extra and its all a fresh batch so it will be good to use into next year.
Check the dogbones they act as the torque arms for the rear if they are bad they allow the rear axles to go out of line and that causes the rear to jump as the axles move forward or back and side to side from the looseness.
Today I picked up 16 tube type steel belted radial goodyear tires on ten bolt steel budd rims.There is eight G126s I can put on the drives as a set but there is a set of two 1100-22s I would like to use on the steer axle all the tires except these two are 1100-20s and all are on budds rims.I...
I am getting together a quantity order of 383 green CARC I have to buy at least 10 gallons and I may buy 20 if the price is right.I have used this last summer to paint four trucks and all came out like the one pictured its easy to use too.Its the type one and I use the NAPA MSA brand reducer...
LDS has a much bigger turbo its a dead give away unless it has a deuce turbo D or C you can bet that bigger turbo is pushing out more HP than a standard LDT.
Use camper tape its much better than the old seal I use it on all my trucks the bead on the old seal forces the water into the cab its a bad design.Camper tape is foam and has an adhesive side and wont push the water into the cab.
Our state no longer accepts SF-97s from GL but they do accept them from the GSA something to do with being reassigned by GL and not directly from the government like the GSA now we get arizona titles in illinois.
Place the socket or a piece of solid round stock in the vise put the U-joint cap on the socket and hit the other side or topside of the yoke with a hammer behing the topside cap while holding the driveshaft under your arm much easier and a bigger target to hit than a socket.
The difference between the napa plugs and stock is the spades the connectors slide onto are to wide on the napa plugs the connectors will not go onto them.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.