Search results

Strip the axle from the trailer keep the shocks. Use the spare from your jeep to measure for clearance on the trailer. ABC trailer.com or R&P trailer seller on Ebay for new axle. 1. center pin to center pin measurement. 2. flange to flange measurement " use your spare to measure this. 3. you...

Nice trailer, Change out the axle for one with matching hubs and electric brakes. What are your other plans? I went with Grotte tail lights on mine Very large and brite. My build: http://www.steelsoldiers.com/showthread.php?82301-Rebuilding-MY-m101a2-BY-harleyhouse&highlight=

Take it off, Lay it out flat and measure. draw it with measurements added and email it to Mytarps.com for a price.

Thanks, If the urge hits again I can find anouther. I still have my M101A2 and will focus on building it into a better camping trailer.

Just sold my M116A2, on ebay, High bidder met reserve at $500.00 Sad to see it go but It will give me some money for other toys.

Just sold my 116A2, Sad to see it go but It will give me some money for other toys.

Let the build begin!

Darwin T Very nice combo! Can you put it to work or just for shows?

Correct The carriage bolt head is inserted into the keyhole slot in the tub crossmembers. The L shaped plate holds the tub to the frame and the nut locks it down.

Ebay seller Discounttrailersupply 2" coupler and adjustible channel plus two bolts. Best price $39.99 plus shipping Maybe not a bike rack............but to tow tandem in a parade?

Many bolts and clamps holding the tub to the frame. But taking it off to clean and paint made it much better. Four bolts and the surge lunette assembly came off. Pull the brake lines too and leave the rest alone and the hand brakes work fine. Weld on an adjustible channel in the tounge V face an...

This is the tongue V that I cut off the landing leg. I used a crank up jack that mounted on the side rail of the tongue. It just shows that I ground the pivot off flat. I removed everything that was not needed to save weight.

The trailer sits nice with the lifted ford. Too bad Ford had to change to a metric lug pattern on the Superduties. The trailer is 8 on 6.5 pattern. Makes using the same spare as the truck not an option. As for dumping Don't It will break at some point. The pivot is at the wrong angle for...

My Build on Expo. http://www.expeditionportal.com/forum/threads/63713-Just-purchased-a-Military-trailer-to-build-a-family-hauler

In theory it should work, they are both about the same width. You may need to add mounting points of bolt it on like a pick up bed through the floor. Mixing the aluminum frame with a steel tub may cause a galvanis reaction. Put spacers of rubber or insulating material to keep the two metals from...

http://www.superpages.com/yellowpages/C-Welding+Services/S-TX/T-Fort+Worth/ Lots to choose from

Looks like Klmore bent custom mounts. Anouther way is to mount it to the bed side stiffeners,

On the other trailer site I frequent there is a member KLMORE that rebuilt a M101A1 for a camping and hunting toter. It has turned out great and he has some good ideas to make the trailers more useful. His build : http://www.expeditionportal.com/forum/threads/27106-Full-size-trailer-build...

See if there are any SS members that weld in your area. We all look out for each other and help when able.

http://www.harborfreight.com/15-watt-12-volt-solar-panel-96418.html