Search results

Hey, 6 in wide lifting straps don't stretch very well!

Yep, motor is alive... and made a heck of a smoke cloud in the barn.. had the doors open. Got everything put back, and gimps truck is repaired from a squeaky bearing.. Dennis

Already did that for the multi Kenny. This is Gimp at Stretch's.

Tell them it's junk, then offer 500 for it! I'd say the inj pump could have issues. Don't think anything else would be hurt. Sounds like a battery issue, throw a couple of good batteries in it and see what happens. Also add some oil to the fuel tank. Good car batts are fine for a deuce...

Still on hold?

Still on hold?

It's impossible to tell. Trucks from the govt. come turn up, down, and every variable inbetween. It's rare 2 deuces will run the same. You could set it by boost to stock settings, as mentioned in other threads. Safest way to set it is by pyro. Dennis

Managed to back into the corner of the carriage barn once. Stopped the deuce cold, and barn didn't even move. Red building in pic.

On the side of the winch housing there is a plug, fill to bottom of hole. Somewhere around 2 in from the bottom.

Don't think we have any multi trannys, thought they were all gasser.

If you grind flats on the outside of a socket, you can use the socket and a wrench to remove the nut that holds the piston on. Then the piston and cylinder can be removed.

that's odd. the 52 m108 has 1 in pins and shackles for the front.

On the original question, cameo55 bobbed on using a piece of M35 frame front and back to mount the springs, mostly for lift. Dennis

It depends, auction will usually net you at least 1000 less than a dealer will sell one for. If the paint looks really good, good tires, and some nice pics, I've seen them sell for 4000+. Deuces are really worth more when it comes to what you get, so selling local sometimes works out best. A...

I didn't see where you mentioned it, but any time you change a filter, you have to bleed the air out with the bleeder on top of the secondary filters(two filters mounted on driver side of engine). With the in tank pump on, opening the bleeder until you get a solid stream of fuel, at least 10...

Welcome!

plenty of ohio guys here. welcome!

I've moved the filters back 4 inches on the frame rail on both trucks. Now I can access the filter bolt without moving the alt, or bending wrenches. Makes it a 5 min job to change a filter. Dennis

Just a warning, there are other 24v bulbs that fit. I put another brighter bulb in and melted the lense cover.

I feel we need a link on th main page because... It would reduce for sale posting in the forums. Resources tab does not bring to mind classifieds. Reduce newer people from being corrected for posting in the forums. This is something that takes up moderators time, and seems to be happing...