Search results

a snorkel does no good if you drill a hole in it. a drain hole becomes a fill hole when it's under water.

I have a very good used bearing and 2 back rest pads. bearing is silver in color.

so, why change the cabs?

you would need close to 75-100k to make what you are thinking of to get even close to looking the part. being a v owner myself I can tell you there is no point in buying the 998 if you want a 1151 or 1165. the whole running gear is different. from frame up to the crossmembers, brakes axels...

spike is on ch 241 on DTV.

the isuzu's even had a lowpro version with smaller tires and wheels. So when you remove the brakes and all that you could prob fit the smaller wheels and tires on there.

I think some of the import cab over trucks like the isuzu have the same bolt pattern as the deuce/trailers. so you could prob find some of those that are much lighter and shorter...

ya they are, I filed a complaint against a buss that stole $5k from me and I was told that since the bussiness did not respond to the BBB's letter, that they were dropping the case and would do nothing further.

next time don't waste money on a vacuum gauge. get a boost only gauge.

nice. me likey.

you sir have money to burn. congrats!

simply putting the bed of an 816 on the back of a deuce would overload it and would look so silly you'd be ashamed to drive it.

that is an m66 backrest with pad. one of my rings did not have the mounts for it.

I'll prob make some backrest pads next as finding one with that attached is near impossible and I have 2 of them. NOT ALL RINGS HAVE BACKREST MOUNTS. one of mine doesn't and one does. I also have patterns for making the canvas brass deflector.

if he is talking about the pass seat having metal decking on it's back then both mine already have that and I don't need it, but if it's something I'm not aware of then I'd be interested in it.

I didn't know there was a difference. got a pic of it? just has tread plate on the back of the upper half?

update.!! looking good, final test fit.

any surplus dealer will have them. doubt a tire store will as there are almost no commercial bolt together wheels.

nice looker. I've wanted to cut down a set of seats too.

it's not that sensitive to low levels. sounds like you might have a bad gauge or sender. you can run them a gallon low and not affect the pressure at idle.