Search results

Question 1, yes...all the time Question 2, yes...California gold products Question 3, They are doors....not sure what else you can hang there...other then no doors.

right on brotha....at least one confirmed listener...LOL To be honest, I'd did have another, just not on this forum, he had found the same as you.

I still have sets for sale...

Can the M1083 cargo bow kit be made to fit the M1078?

Antenna mount....

The 6TL is made by interstate

I a set for sale...they actually belong to a customer who bought them but changes his mind....he wants 200.00 for the set. that part number does not come up as a valid part at any of my distributors...so I have no idea where he got them.

that explains why my dash is stenciled "30 MPH" i do have all new drive shafts on my truck...

I use nothing but 80 grit and it looks fine...CARC lays on thick and fill most imperfections. Type 9 CARC looks beautiful when done right...does not compare to the old silica based stuff, that stuff was like 120 grit sand paper.

You want an epoxy primer compatible with aluminum.....if you get to bare aluminum, it needs acid washing and alodine treatment.

My left front ctis valve on the tire makes a shrill noise after turning the truck off, even after the tanks are purged. if I tap on it, it stops....is that what you are referring too?

All fixed....this part did the trick.

Standadyne makes there own additive, it's a Cetane booster and lubricant, something you won't get from ATF is the Cetane boost...kinda like octane booster for a gas engine. i buy it by the case.....

i have had this issue on several customer trucks...the key is simple, once your tranny slips, STOP! anything after that is just ruining the Trans clutch plates, that equals rebuild. as far as the tcase, just loop the Tcase back to itself and same on the 2 tubes till you get it fixed. you might...

And what I tell everyone who wants a Slantback is....your going to get wet.

Hmmwv pump for 1985-1989 is -4523 or -4524, I have used with good succes the -4879 also, but this is stated to be for 1990 and above 6.2 engines. The issue you will find is the 1990 and above 6.2 uses different injectors and Lines. the body of the injector is shorter, thus the lines are longer.

All I have is an iPad right now...I posted a pic some time ago as well. all I can say is just install a double decker radio mount. I've seen others on the forum who have done the same.

There is still plenty of room...there are 2 shelves. I have a .50cal ammo can on mine, my IBIS Tek light bar switch panel. I could add a ton more crap...and even more if I add all the brackets off of it for other stuff like phones, monitors, iPads....

Yes, mine was a runner.

not sure why everyone is trying to cool down a Diesel engine, please remember how they work, these are not gas engines. you need fuel, air, heat and pressure....thus the heat makes for efficient combustion. It's not healthy for the engines to not reach operating temp. In the case of the 6.2...