Search results

The LMTV has Everstart batteries in it right now, and i usually fire the truck up and keep a battery maintainer on it, but this time i just forgot. I also need to rotate the batteries. I buy a lot of batteries due to my Generator Hobby, and Usually get NAPA AGM batteries for those when i get...

If your already on Generator why not supplement the heat with a small space heater

Membership is cheap and helps keep the site operating

Going to revive my thread. Went to move the truck today due to parents visiting with the motor home. It took over night of charging the batteries to finally get her to start this morning. I think i need a new either bottle as it did nothing to help with a very cold start. I tried last night...

So i was correct in a previous thread and telling you that the battery needed changed to keep your settings and memory alive when the breaker is shut off?

So it sounds like it could be a stuck float reading empty because if you are on aux then that means the aux float is not kicking on and filling the day tank therefore running out of fuel, and since your fuel gauge is NLA then you have no idea if its working

Pretty easy for the water heater or well pump or something to kick on and draw a larger load than you thought.

I second rodent damage. time for the top to be taken off and check the wiring underneath

Looks like its time to drain the tank, lots of water there. Also a good time to check the filler cap to make sure its not leaking

Did you have Algae in the fuel or what did it look like? have you changed it before?

I'm In

you do not have enough post to pm but @Poccur has the TM he has sent it to me but i am not allowed to send it to you.

Rubber parts as in , cab bushings, sway bar bushings, hoses fuel, oil, plastic air, Orings in everything. cab lift pumps, cab lock, selector valves for the cab, tire, and kneeling manifold

Would you also be over height with a conex on the back of the truck?

my maintenance does not start from zero and i always turn off the main breaker. Must be something wrong with your internal battery that stores the memory, all the units I have bought never had the batteries hooked up and sat in storage for 10 years and were still only a day off and all memory...

Just looking back at the pictures i guess i need to adjust the clock setting or I am just that good at traveling to the future and back

Getting ready for Winter started a little early tonight. Car Accident took out the power for about 3 hours. after about an hour i decided to break out the 1040 as i have never had it hooked to the house. 30 minutes making up a power cord and got it hooked up. As it wasnt 100 degrees or -30...

Driving daily does not mean its is good condition, i am 2 years in and still replacing parts on a 1997 that has 5000 miles on it. lots of age on these trucks and all the rubber parts are just old. be prepared to spend about $500 a month for a while

Its not that major to remove a panel or two on the ask kit. You will want to learn now anyway because sooner or later you will be working on the unit. even with 18hrs i would say sooner these units are pretty old. mine has 118 hours and doing the battery modification right now

I worked on the 531 some more today. i realized that a brass bushing in the end of the starter was broken and that was the original noise i heard clanging around. so i looked in the tm and it told me i had to remove the generator from the engine to change the starter which i was not about to...