Search results

Make sure the top is slid down all the way into the side supports of the soft top assembly. It should definitely be low enough to allow the rubber rope to apply tension. When did you go to Ranger School? My brother went through in the late 80s. I can ask him which class he was in if you were...

Charlie175, is the rope I see in the pic above the rubberized rope you are talking about? That rope does not look right. You can pull some excess rope out of the sides to tighten it up some.

You can lower the windshield frame. Just hit the fasteners with some PB Blaster or similar. While it is down, you may want to change the rubber seal under the A-pillar. You should be able to find something suitable at Home Depot.

The M275s are from the same family as the M35 (both M44 series), but they have a shorter chassis, different fuel tank, and other tractor-related differences. The M36s are somewhat rare, but they are out there. Also, the M342s are even more rare, but they, too, are out there. 11ECHO on this...

The most difficult part for me was getting the bolt holes to align after the winch with frame extensions was in the frame. I had a h*** of a time getting the last few bolts into the bumper. I got it done, though. :)

You don't always see pioneer tool racks on M923s/M925s, although I don't know why. I have seen them before, but it seems like they are absent (never installed) more frequently than they are present. With that said, when I have seen them, they are mounted to the top of the toolbox on the...

I was going to say the same thing. There are plenty of 6.5's out there. Nothing wrong with a good running 6.2, but I'd take a 6.5 over one. Contact TNJ Murrray in DE. John has some available.

I've had all kinds of stuff left behind: *Manuals, sometimes in pamphlet bags. *Turn in documents. *Directions to the turn in location. *BII (although never a complete set of BII)...tools, tool wraps, fire extinguishers, jacks, snatch blocks, chains, wheel chocks, etc. *Six plastic barrels of...

Jeff, I don't know sources for parts other than this list, the Internet, or eBay. While I am unsure if they have the parts, you could try Eastern Surplus in Philly or Memphis Equipment in TN.

Jeff, it was nice meeting you this past weekend. Yes, I believe those cargo tie downs are supposed to rotate, although it has been a while since I had one in my yard. PM CUCVFAN to ask him as he has my old M105A3. I have seen the rubber rope for sale. I think you may be able to retrofit the...

I'd strongly recommend changing the fuel filters before you set out, and also bring along some extras. Oil can wait until you get back as long as it is topped off and not too dirty (still better to change it), but a clogged fuel filter will bring you to a complete stop. Does the truck have the...

I don't have any response that is relevant or helpful, but I wanted to say that I like your screen name! My next (or the one after) German Shepherd will be named Poolboy (the next will be Holly)! My wife is hesitant to get another dog (we've always had German Shepherds) because of the feeling...

Entered.

I'd suggest installing the high-back seats with the 3-point seat belt kit. I have never used a car seat in a HMMWV before, but I assume it would work just fine with the 3-point seat belts.

I'd recommend you post the pics from the auction. The pics will show more information than a screen shot of the auction. Congratulations on the new acquisition.

A lot of shops say they are not responsible for thefts that occur on the premises. I don't believe that is accurate. Talk to a lawyer.

Ken, great job. Great score.

Jeff, get well soon!

Carefully sand down the layers of paint on the bumper. Take the proper safety precautions for CARC paint. You may be able to trace the truck back multiple units.

John Winslow (RIP) had one for sale once that was really clean. His truck was complete and fully operational. He had it for quite a long time as I guess it was not a hot seller. He offered it to me and I considered it for a while, but I did not end up buying it. It was probably 15 or more...