Search results

Is it hitting the whole side or just near the top? Maybe if you raised only one side it would tilt side-to-side enough to fit better.

I am curious if there are any state or federal laws that exempt people with hybrid or electric cars from paying road tax? How fair is it for them to get away with using the road without paying tax while we have to pay just because we burn petroleum fuel. What about other alternative fuels...

Filter part numbers for MEP-004A or MEP-0013A gen set I need the filter part numbers (NAPA if possible) for the MEP-004A or MEP-0013A gen set. It has a 4 cylinder White Motor.

I would strongly suggest you try to repair it before you go spend lots of money on a replacement. It is easy to take apart and clean/lubricate. I am sure you can get replacement o-rings from NAPA or other auto parts store if they are needed. Mine just needed cleaning and lube.

From the spreadsheet on this site: NHC250 Spin on oil Conversion NAPA FIL 4067 WIX 24067 FleetGuard 300923S On the top of the box: (NAPA) 524067 Instructions say: WIX 24067 KIT Asking for 5/8" -18 UNF -2A Grade 5 bolts

The NAPA version did not come with bolts!

I appreciate the info. I will get a 4-1/2" bolt and a 5" bolt just in case. I would be concerned with having a stack of washers on there. More chance the bolt could come loose from vibration.

Actually there is no NHC250 engine listed in the instructions. These adapters fit different engines that use a large canister filter. I think that is why they don't include the bolt. I was just trying to save from buying 5 different 5/8" bolts for the adapter and testing each one. i am...

I purchased the oil filter converter listed for the Cummins NHC250 engine. The kit had everything except the center mounting bolt. The instructions say it could be a 4", 4-1/2", 5", 5-1/2" , or 6" depending on the engine. I was wondering if someone that installed it already know the proper...

Let us know how it works out...:grd:

You had the correct answer! It's the hardtop. The Cab frame is flexible. If you don't line up the doors when you install the hardtop the alignment can be off. It happened when we installed the hard top on my M109A2. Loosen up the large wingnuts that hold the windshield on the sides. Loosen...

The fan belts on the M939 series should be different since it uses a air fan clutch. Not sure about the rest. I know the belt for the water pump is the same 2522425 or Dayco 22425

Are these for t he M800 or M939? The M939 has a different fan so the belts are not the same! The belts you listed are all M800 series.

Would you mind posting the part numbers for them? I would also be interested in an extra set. I need to get them for tomorrow or Tuesday so I can get my truck out of my friends parking lot.

I have that. Where on there are the belt numbers for the M939 and A1's not A2(different engine)?

Yes I tried to search for them. Not sure if the M809 series belts for the NHC250 are the same. I need NAPA part numbers for all the belts for the M931 truck. Thanks in advance!

Went to NAPA this morning to pick up the bypass coolant filter kit i ordered yesterday. WHile I was there I ask for a price quote on a replacement thermostat. Price was right so i ordered one. I was told it would be there around 2:00 PM. I also picked up a transmission filter and some 10...

Did you check to see the voltage? There is one on there cheap, but 12 volt.

Thanks! Will be picking it up tomorrow. I'll check into it.

Here are some pictures of the plumbing work I did for the bypass cooling filter project. I ordered the bypass filter kit from NAPA and it will be in tomorrow morning. More to follow!