Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I'm sure a SS member can chime in and answer this one fast, But what is the red tag on the equipment.
Just ID numbers or is it more significant?
Thanks
BVDL
I found some ads on Craig’s list for racks that would fit a K5.
Met with the guy who owned the most promising one. He had fabricated it himself, and parted with it for a very reasonable price.
It sits on four feet that have four bolts each running through the fiberglass top. The inside has...
OK I give up.
Is there a glue or should I use silacone or what?
I replaced the rubber filler gasket that sits in between the sash and the glass about 2 months ago (lmc). I had hoped that after time the glass would seat and not move. But it still slips.
Should I use something on the filler...
Has anyone put a swiing case by undercover in the back of an M1009?
I cut down the Jerry can holder on the left and was thinking the swing case would fit nicely.
Looks like this.
So wile looking around my local surplus shop, I came across a box that looked like it would fit between the front seats. Brought it home and it fits great.
Cut some holes in the top for a hinged access / armrest and a couple of cup holders. The box opens at the front and I plan to seal up a...
OK so first off, thanks to many on here whos ideas I have stolen and made my own. Without this forum I would have spent way too much $ having a stereo shop put tunes in the Blazer.
So I searched alot and saw Linx 310 post about his $12 stereo solution...
I have the whole window crank assembly fresh from lmc.
Ready to go in the gate.
But how do I get to the nuts on the back side of the assembly (inside the gate)? Do I pull the regulator out through the access pannel or is there another way.
My window slipped and is currently on the bench in the...
I replaced the door locks today, and thanks to WARWAG for the pick and the write up. http://www.steelsoldiers.com/cucv/61076-cucv-door-lock-replacement.html
Here is my write up with pics.
Pepboys for the locks part# DL15250 less than $20. (pic 1)
Pulled all screws from inside of door...
So I decided against the Herculiner and ran over to 4wheel parts in azusa to pick up the Al's liner kit. After reading some other members posts I opted to drop in at Harbor Freight and pick up their spray gun ($20 vs. Al's at $50). One gal. of Al's liner cost $99.
Prep on the CUCV took a...
I searched for the answer to this question, but only found info regarding Deuces.
The M1008 and M1009s are exempt from California's new diesel "smog" law.
This is because they were manufactured before 1997.
Is this correct?
Thanks in advance.
B.V.D.L.
Sorry if this has already been...
So sorry to have to aks this as i have searched everywhere.
Cant believe that I dont know, but...
What are the two ports on the front of the cucv m1008 ?
On either side of the grill. Electrical? Coolant?
I cant figure it out from pictures and havent actually seen one in person.
Soooo much...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!