Search results

A1 and a2 had the bigger tire with a different tire carrier and beefed up davit to handle the weight and width.

Not sure why that would be needed in Thailand?

La has a vin stencil law and a military plate law. Easy peasy more than most states. All done in Baton Rouge at the special and prestige plate unit.

Greetings and all the best.

That is the new mail truck for the even slower now snail mail.

That is just a channel beam that was a field unit mod

I forgot to mention to make sure the holes for lugs are beveled on back of rim to flip them to use on rear. Some fmtv rims are only beveled on front. I run 2 fmtv style caiman wheels on front with run flats and 4 combat m939 wheels on rear.

Those fmtv wheels will bolt up. Just a tiny fraction different backspace that you will never notice. Save you a ton of work. Smaller tire will cost you a few miles top speed but I suspect your roads are just as bad as in New Orleans or Baton Rouge......

I use a harbor freight https://www.harborfreight.com/100a-612v-battery-load-tester-61747.html Northern tool also sells digital one

Load test batteries 1st before doing anything if charged. If not bring up to proper voltage before load test.

There is the out side possibility that a shut off was installed or hoses tied together as a quick fix around in case of a leak. Also look at the heater control valve to make sure it is operating correctly. Pop the hood open and give it a good look see over all the heater components

Just a thought but you might also think of tying the antenna back as it can get easily caught on branches/trees. I broke 2 so far on my m923. Dont ask me how.... I now have the short 4 ft one mast model # escapes me.

I use and like the under bed brackets from tmg. Can be lifted up under bed one leg a time. Rock solid. Ymmv, I do not use it on a regular basis.

Would that date plate look like this?

Wolfers is a known vendor/flipper with many china com knockoffs. Search here on ss for many reported issues Just look up a h1 hummer if is the base early model m998. Oreilly sells moog or can order it in

I believe there is some sort of realignment going on with Federal Mogul Auto Parts which was acquired by Tenneco. They are the parent company of Moog and Precision. Precision is now starting to offer a full line of chassis parts in addition to the cv and u-joint products plus control arms they...

those are circuit breakers. What model truck do you have?

I know mine during the summer going down the interstate with the 6.2L is just plain hot for my right leg/thigh and I do have all the insulation tid bits. My ebrake does have a new boot as one of the first mods I did was to put in the locking model. I believe it is part of the joy of these...

I see it now. This is for the late model a2 and a3 ribbed beds with the 4 lifting eyes. Could you take another close up pic of the plate. I could use 2 and maybe I can find someone to duplicate.

Interesting. Always seen the tie down plate on the m116 frame. What is the mode vse did?