Search results

Only REV uses 120 BAR pump for shepherd steering gear

what you are seeing in the pic is the shifter boot..

Wait till you see the price of a 4 speed shifter boot….

Hummer H1’s use the same size Radiator as Non-ECV HMMWV…. Send out your existing radiator for a cleaning and pressure test, many many of these trucks are subject to salt water emersion and it plays havoc on these radiators regardless of the age. You don’t need an ECV radiator to run a turbo...

The nut comes off with an impact driver, the pulley will either come right off or will get destroyed trying, ive done about 100 of them, most common in the pulley will separate from the bearing, leaving just the bearing still stuck on the gen shaft, if the clutch action is seized, just buy a new...

That pulley is wrong, you must use the clutch pulley on 200 and 400’s with late style serpentine setup.

Why are you removing it? And which pulley are you referring too? There are 2

Correct, but that pump is not for your application steering gear, so it could be causing an issue I’m unaware of.

The 120 bar pump is for the Shepard steering gear…both of them whine regardless

That is the ground that should terminate on the fan motor, left side, it’s a fine thread 10/32 nut. The hot water valve fails in an open state, it only closes when AC is selected.

90-120psi, tapping on the fan clutch housing to break the clutch plates free… you can even loosen the 5/16 backing plate screws and do same till it breaks free. this is common on these auction trucks from sitting.

well aware…that’s not my point, an Abrams can be knocked out too with the right round, I’m referring to what 99.9% of what you would encounter CONUS.

while true, the only way to achieve this is thickness and angles, as witnessed by how the hmmwv armor packages are applied via FRAG levels “confusing in its own Right”. there are no slopes on a hmmwv for the most part, the perimeter armor is both ballistic grade and aluminum, laid on as part of...

My Armored M1152 didn’t leak at all…nor Does my M1165A1 REV.

Lots of money…a set of Frag 5 doors is $12-18k When talking armor, there are a lot of pieces, the TM is very confusing to most. Than there is Composite Armor, this can’t be used with armor plate…

Dave Demorow or something like that…he has been quiet on the FB front.

kinda funny, but I was going to ask you yesterday what box you had, I had a truck from auction that had all the GP boots stowed and tie wrapped, initially I said “what?“ but quickly figured out it had a LAU box, I was surprised to see one on an auction truck being so late in the game. I’ve had...

The red Dot condenser is massive and is heavy as hell, as is the evaporator…they can’t be installed Willy nilly safely for the occupants safety in case of collision. I do one of these AC systems about once a week, I’ve installed them every which way, but safety is paramount for the occupants...

The truck will start with 4 or less glow plugs, but have you asked the person you bought it from why it’s come in this condition. Also…while I know the truck is new, one would assume you did some research prior to purchase?

absolutely not…just because folks are asking $100k, they aren’t getting it or a Fool bought it. My buddy just sold a mint 04 with under 20k mikes on it for $80k. That truck in the video is beat..