Search results

so what if for now we just put in valve cores on each tire were the ctis hose goes on . then fill them up to the 80-90 psi range and reinstall the hose to keep crap out of the system . then unplug the electrical connector on the control box at shifter tower . will this be a o.k. delete or is...

rear axle air line hose to axle fitting is eaton 48x12 part# . this is the brass pipe thread to jic style hose . truck is back in service if and when we need it now . i have the old tire/rim at my house trying to get the bottom half of the rim off the shreaded tire . . . will be making a...

I have a factory spicer dana 60 gasket installed on a 100% clean / dry / no oil yet axle . thick factory cover and flat checked . the gasket leaks 80-90 oil out it and the axle has never been put in service . just go get a tube of permatex rightstuff in the cheese wis can and never look back .

if trans fluid is red on dip stick and not pink then your prob good to go . but axles / tcase / wheel bearings in the front for sure i would pull/ clean as needed and repack or swap in new fluids .

i did a refresh of a top end on one for a 936a2 with 8.3 in it . https://www.steelsoldiers.com/showthread.php?142766-tsm-for-the-air-compressor-rebuild-info-or-service-specs&highlight= 1 i did just needed gaskets . she is pumping air good to this day .

that was the plan on full removal . wasnt sure were to post a whats it worth thread . will verify it pumps up and goes steady before remove .

looking to remove the ctis system on the m936A2 truck . for what we use the truck for and few times we use it we just want reg old tire fill system and check . looking at the delete kit offered and had a few questions . truck has 14.00x20 goodyear at-2A tires on it now . whats a good psi...

made it down to ken kublos place today . he had a lot to pic from . I grabbed 2 of them and we aired them up to test for any leaks we might have missed on visual check . all good . he also had new o-rings in stock . always like walking around his place down there . goodys hiding in plain sight...

cool . we have a hydro hose shop in town with LOTS of fittings and wierd stuff . . . . thanks to all that natural gas drilling in the north east last few years . if i get a good part # i will post her up for all .

here is whats left of a 14.00x20 mich xl tire after 1.2 miles at 5mph limp off the road . she was already coming apart in the mirror when i heard it go . she didnt even realy pull at all . and here is the view of the broken fitting top of axle down . what part # or name should i be looking for ?

the boss got it chained up / block of wood wedged on the back of the walking beam . putting threw town she made it back to the shop . will get pics posted of hose fitting later tonight . called ken at kublos surpluss in brackney , pa . he is 1.25 hr from me and he said he has me covered on...

was going along in our m936A2 wrecker today to help fish out a backhoe up to its doors in mud . . . he couldn't open them he was in so deep . 40ish mph down the highway and BOOM Left front rear tire shreaded . it was a older mich XL 14.00x20 super single that was its original spare that...

that's what I was thinking guy . thanks for the info help .

so what is the basic deal with the 4 batts 2 12v's to make 24volt and then a whole second bank . . .

cool info guys thanks . looking around the 31 seems to be a much more instock option . interstate 31-xhd is 12v x 1000cca @ 0* temp . napa bat-7234 is a 12v x 1125cca @ 0* temp . the owner has a charge account at napa and he has had good luck with them in others so that's prob the option...

looking to replace old led acid us 6tmf batterys that are mad in 2010 and been left dead a few times . there the lead acid with the 6 vent caps . looking to go simple and free up space in cab . read up some guys in the past have moved them down to the pass side tool box area . is there any...

I would notch it for the steering if you even need to . . . play it safe this way .

pics of brackets I made for blazer tank in to a k30 frame . remove rear most crossmember and make new . set blazer tank up in and level and fab new front for its position . I then bolted all in with 7/16" bolts . sorry no finished install pics . dam forum wont display in my order of...

I would skip the tube style pan out of metal in the rust belt . . . . winter time would eat it up ! ! ! get a cast aluminum pan for the extra capacity and it also helps stiffen the case.

get home tonight I will try and remember to post up pics . I remade the rear most crossmember and fabbed my own up for the front . this was for a 31 gal blazer tanks . blazer tanks are same size except hang down a tad more for the extra capacity . I made my brackets out of angle iron ...