Search results

What would it cost to have one shipped to MI - ZIP code 49623?

Post the markings here, someone will chime in with the answer!

The appendix is in your lower abdomen near the junction of the small intestine and the large intestine. Also, an appendix is a reference section at the end of a book.

RE: Re: RE: Re: RE: Stearing problem in M54 Bobed 5 Ton First, check for worn tie rod ends or worn drag link ends. If all checks our OK, then start working on toe in. With radials you probably need positive toe in. I'd suggest starting at + 1/4" toe in and work upwards from there until you are...

I kind of like my idea - also used in conjunction with a chain through the steering wheel as required.

Made Good Use of the M125 Wrecker Today! Last of the pictures.

Made Good Use of the M125 Wrecker Today! Well I finally got to make good use of my M125 wrecker today. There was a good sized tree near the front of the still under construction Green Machine Motel, which my concrete contractor decided would interfere with my approach ramp and needed to be...

From the M35A2 data plates I have: LOA 262 1/2" wo/w, 277 W/W WOA 96" Height 114-11/16 " reduceable to 81 WO/W"; 112-1/16 reduceable to 79-11/16 W/W Weight 13,030 lbs WO/W, 13530 lbs W/w

Re: RE: Re: RE: West Coast Mirrors The general design/styling originated in Kalifornia.

How about a custom 10"x22.5" wheel, tubeless radial, 11" pilot hole, 10 bolts on a 12.75" bolt circle?

OOOO EEEE! Lotsa neat stuff there! any chance you have a spare three part line snatch block for the crane like you show in IMG_2690.JPG? I sure could use one!

Bendawg - After you enter your first photo, hit "Preview" rather than"Submit". That will preview your posting, plus open a spot to insert another photo. Keep hitting "Preview" until you have all your photos posted. Note in "Preview" mode they will appear in REVERSE order from the way you entered...

Has anyone ever cleaned/changed the hydraulic system filter on a M543/M816 Wrecker Crane? The filter indicator on my truck is permanently in the "Bypass" position, even with the engine shut down, so it seems some PMCS is in order. From reading the PS Magazine articles this seems like a no...

Can you post a picture of the part in question? That may make it simpler to find an answer.

Re: RE: Re: RE: M125 Wrecker has a new home!!! Yes, it will be renamed "Bad A** Beast". As I recall, the Highpoint driver mentioned he had a return load not too far away.

RE: Re: RE: M125 Wrecker has a new home!!! Well I finally got my historical plate today so I took the "Bad A** Beast" (nickname a joint effort of my boys and I) for a short drive. I am relearning my "double clutching skills) As mentioned, it idles like a kitten purring but has an irregular...

Thanks, Lorax. BTW, the classified ad is working again. -- Lee http://www.steelsoldiers.com/modules.php?op=modload&name=PN_zClassifieds&file=detail&cat=3&de=553

My M125 (Le ROI 844 gas V-8) idles real smooth but has a definite intermediate miss/loss of power once it gets much above idle speed. The previous owner told me ti had a 12 volt coil in it. I am highly suspect the 12V coil doesn't have the capacity to handle that big V-8. The coil is located...

http://www.dieselmanor.com/isspro/r3607tr_ev_pyro.asp

Actually, it is worse than that. Many parts of the country (particularly the Northeast and Midwest) commonly use Home Heating Oil (HHO) for a fuel source for home and building heating. HHO is essentially the same as the good old low sulfur No 2 diesel. Thus during the fall, winter and spring...