Search results

I'm satisfied with the Hobart 187 Handler from Tractor Supply. Go with shielded gas and 220v.

Baz, the air line Is plumbed into the air inlet between the air filter and turbo inlet. Maybe drill and install a connector in the air filter housing or let it vent overboard.

I'll get back to you tomorrow , got to go up to the shop to get a look at the truck. If anything, it can be let to vent in the engine compartment.

Several large lots of those hoses sold on the GL site last month, surprised they haven't shown up for sale. The purpose of the hose is to route return low air pressure from the sterring actuator back to the engine instead of being vented overboard. Any hose with the correct ID will work. This...

Sounds like he needed the right pit crew, bleach the tires, get 'em hot = low ETs

Were your tires hot enough? Maybe open the windshields for better aerodynamics.

You have to work on your hole shot, you had that Camero. Looks fun.

Welcome and keep working on it. You'll get the bugs out of it. Then buy another MV and start over. Have fun JC

If the points are shot ,you're doomed, I'll be down in the morning with a trailer to get it out of your hair. Nice find, wouldn't take much to restore it, seats and paint will make it right. Good for you. JC

Mike, Thanks for the info and codes, headed back to HD JC

The regulator assembly is replaceable, pretty straight forward. My parts guy has NOS regulators for the 60 amp unit. Bearings and rotor OK?

Any pics of the paint codes on the cans. I got a funny look from the Home Depot guy, "you want to paint a what,? with Behr paint. I have an older screen shot of a paint can lid, just double checking.

DH hit it right on the head, these vehicle have been through a lot of different hands in their life. You got to ask yourself "what if"? I have aquired two trucks with winchs and the second item checked was to ensure the shear pins were correct. First this was check the oil. These trucks are...

Grizz, Welcome to the madness, but it's fun. Lots of decent trucks out there, plenty in your neck of the woods, as for the low air pressure warning "go off", that could be a failed warning switch, (under the center dash in the cab on the fire wall) real simple system to t/shoot. Most likely...

Installed a set of Ouverson lock out hubs on the front axle this weekend of my A3 this weekend. Need to modify the CTIS stone guards now. Has anyone accomplished this mod to their stone guards? I have a couple of ideas, waiting to start cutting. JC

I have done business w/ Ted's Trucks for a while, no problems. Everything is as advertized. JC

Works well. I entered "gear oil" and it had links to everytime someone asked the question. Afraid to enter "hole in bellhouse"

Front looks good, lets see a profile shot.

Pretty easy task. Spray the tank clamp hardware with PBS Blaster, disconnect all the plumbing and relax an air line or two and they come right out. Tough part is sitting under the truck. You can weld patch the leaker, however you most likely have another leak down the road. Install an auto...

Lots of info on the web. Not many in the US. These were tested before theOshkosh Mk 48 were released. Parts will be difficult to find and most likely be sourced in the UK or Germany. Buy American made.