Search results

Use the Anti-Monkey bananas and steel wool method with ATF in the fuel tank.

You mean you can buy them!? I had to make my own. Just try to find a bottle of cheap wine now with real cork in it. I tried lots of cheap wine before I found a real cork!

And here I was thinkin about Goats right away, Thanksgiving and cars and clearing rights of way. Yep, I missed it

You asked at the right place......to help resolve say which controller is in your truck.

Hey it was only a 96 month break there.

A few more photos. The first SS member that saw it bought my setup from me. There is other ways to do it as seen in some of the photos. It all worked OK. I wanted to pop test with the actual fuel I was using which was at least 50% NEW motor oil and pump diesel, with marvel mystery oil, naptha...

post #75 I cut one fuel line to length I wanted, that gives the end for the injector, and joined the output of the line that came with the tester to the truck fuel line with a swagelok 1/4" fitting as in the pictures. I wanted the strength of the line as it is when in the trucks, 1/4" line with...

This isn't really low flying but I like the precision of it https://www.youtube.com/watch?time_continue=3&v=YL9sNrOlK-I

post #39 Crud, mung, corrosion, dirt, yucky stuff, and failed stretched threads on my truck lugs caused me to have to use my weight at the end of ten feet of extension on the torque multiplier to get the fasteners off the first time. Torque specs go with clean dry, or special lubricated, or...

More!

Looking at my research I found this blurb, You can have it.

Old thread so just put all the pictures again. The long handle is 32 or 36", I forget. Somebody put the stud nuts and the cap nuts on at well over 500 ft. lbs ....I figure that as it took this Ken tool and 10 feet of pipe to get them off. And that somebody never cleaned the mung and crud off...

This thread started as "Adding two-stroke oil for lubricity" then went to some other places. The other places writings were all appreciated and worthwhile reading, off subject, but oh well. In the parts about "who the heck said that" about this or that, I have attached a document about my...

In post #59 All four attachments there support the claims and life experiences of machines needing higher levels of phosphorus and ZDDP...........

Did anybody else read that synthetic motor oil will not hold lead in suspension? If one would want to read these some may find enlightening information contained within. They are not in dated order. It just looks like a black box but there is PDF files in there. I don't know why it does that.

Bradley in-tank pumps are still available on that auction site.

I was going to see what the expert is doing now but got stuck on the avatar

Thankyou, At my age I have a new hobby going into 2018 but beginning now. Everything that is not nailed down is getting sold, given away, or trashed. It is amazing how much stuff I have saved up for "someday". Thanks for your comments so Just for your laughs I have to say that today, I am...

I have a set of Multi Fuel engine (LDT Deuce) heads that came off a running engine. I have the used heads stored in original boxes that the new heads come in, can't just throw them away. 1. Question is does anybody know of anywhere in Florida to get them checked and rebuilt? 2. Question is...