Search results

Yea the threaded rod or cut off bolts heads for aliment of the pan make it easer. I also did the same thing for the oil cooler when I did those gaskets. Glad I was in better shape when I did the pan by myself. One hand did the bolts and one foot to hold the pan up till I got a couple of bolts...

As for the boots been to long to remember. One thing I do remember put some grease on / inside of the spindle bushing before you install / bolt the spindle back on the axle.

Mine doing fine but it was a # 6 in the pain of the butt scale when done alone.

I do not know about the M51 but if I remember the Deuce ran the same race's just the outer bearing had a bigger face on inner ring where the inner nut tightens up on.

My well is 100 feet from where the RV sits so I will just move it when I need well water. No I have a 30 amp 10 foot RV extension cord for the 120 hard wired in and the 240 has it's own utility outlet built into the face of the control box. No way to send 240 down 120 line. I just want to be...

Guess I asked the wrong question. I do not know who put this capacitor in the machine. Since I will only be using it at the well at 240 then disconnect and hook it to my RV 30 amp 120 volts. I will not be using both 240 and 120 at the same time or hooking it to the house. Seems like I would need...

Not a problem and yea talking is better than typing when there is a lot to cover. Sure you will trace it down one way or the other by going in steps. Feel free to call again if you need.

Ok want to have any extra small parts so I got a spare 35 amp breaker. My question is about the capacitor. I did a google and they are calling it a light ballast capacitor even has the resistor installed. Do I even need it or do I need another one with different values? The Gen. is running good...

He might be living by him self if the wife has any say.

Well once again getting ahead of our self could be something as simple as said that rubber hose on the in tank. As for filters yea they are more of a performance thing. All the Deuce head needs is just a little flow and very little pressure to just start / idle. If he does call we will start...

Some good thoughts but I like to keep things simple. Filters is what is most recommended first and injectors last. Then there is a horde of other things we can check after filters and before injectors. My thought is injectors last just incase we damage one of the injector ends we will need a new...

To much typing PM sent.

Did he just say it also came with fried rice? Do agree Another Ahab what this world could have been if someone did not want what someone else had. Warriors like war and the money to be made for somebody.

Also remove the nuts and put on the never-seize put your nuts back on and adjust. If you ever make it too Sunny Beach Fl. stop and grab two NOS windshields.

Yea agree why. Ray said he has 12-24 volt charging without converter. My 915A2 has the step down converter 24 to 12 The only thing if he wanted he could install the emergency cut of switch for that 24 volt starter line or just be sure it is not rubbing metal or it is supported correct.

Yea I could hook it to the 373 trailer with the 915 hooked to the 373 and leave town. Truth if it ever came time to worry about it all falling apart I would be best to stay at home. Lake for fish, Canadian Geese, Gator, and water to flush the John plush wash my dirty butt. Then If I took out a...

Yea I thought about a transfer switch installed to the house but think I will just use it for well and RV. I do not want to light up my house and every else in the neighborhood is with out power. They will want to come to my place eat my food and drink all my beer plus party all night long. I...

Reading ALL of the TM it says if the pressure plate was resurfaced! I never planned to take apart the pressure plate and rebuild it from scratch like the TM said. I just ordered new. New no adjusting is what I did and no problems. Yep correct adjusting of linkage and you can leave the inspection...

.Yea my 915A2 has the 24 volt red kill switch / button to stop any major short in that big line. They do / can start a nice fire. My computer is wired just to 12 volt side and it always has a small draw. I just keep all batteries charged 24 volt or disconnect my two grounds and charge the...