Search results

Are those going to be scrapped entirely? Or would they let you pull parts off of it? I see some I could use...;-)

Not a M35 but still a fully functional "Gold Comet" from that same era, from our member reom34 in Canary Islands: https://www.youtube.com/watch?v=YdPRFb4ERnI Another video clip, here: https://www.steelsoldiers.com/showthread.php?32530-the-OA-331-run-again&p=349308&viewfull=1#post349308 Here...

Hand scratched? That can't be the actual data plate. Look further down, on the left side.

To correctly identify your pump you need to read its data plate, located on the driver side. Typical model numbers are DB2829-4520 or DB2829-4521. AFAK, those pumps all came with the pin at the end of the throttle shaft, as can be seen in the picture posted by Chaski. Obviously your pump is not...

Nope, just std industrial 2pc take-apart 20"x 8*, made by Lemmerz. Tire size: 11:00R20 Some good pictures, here...

In that case you definitely need to pull the splined hubs - or the front propeller shaft - or the first rear propeller shaft. Putting the TC in neutral does NOT disconnect the front output shaft!

No e-Bay links please! You may post a picture of the item.

No need to pull the DS - as long as the front wheels are off the ground and can spin freely, because they will... both or one at least, due to the differential action. And because there is a sprag T-case, and the rear wheels will send power through it and all the way to the front axle/wheels. No...

There is no such auto "time-out" / log-out timer. Sounds like that is a problem on your end, with your server timing out?

Nah... of course does the valve housing come off. Why would they have those two socket cap screws, if not...? See this image. Do as suggested in post #7. FWIW, this post shows the larger, 10-on-13.2" pattern aluminum Hutchinson wheel, which has its CTIS valve mounted differently, but it still...

That particular one comes stock on the Brazilian-made MB OM366 truck engines and is probably manufactured by MANN But you can find a very similar dual filter base (WIX part Nr. 24093), for example here...

If you mean the stock mechanical LP, the answer is NO.

I think you mean the speedometer adapter sleeve? https://www.steelsoldiers.com/showthread.php?36012-Speedometer-Adapter-Leaking-Gear-Oil Also related: https://www.steelsoldiers.com/showthread.php?29471-speedo-cable-leaking.html

For the wheels and tires you need to contact Wes. (his username: simp5782)

This link (in post #47) takes you straight to the various TMs - which you then may download.

Merged threads.

That's all right. It might be an old thread but it is a very valid question, still today. (I just updated the title a bit...) G.

If you thought about the Spicer 3053, it won't help you much. With the gasser engine it is not so much a matter of limited rpm but rather the lack of power and torque. Back in my early Deuce-years I tried that myself: even with the truck empty, it simply won't hold 5th OD, except when going...

Now you can... I just moved this thread to the Deuce forum.

... But I see an '84 "ten-ten" already listed there, in your endless collection??:wink: Best of luck!