Search results

Running List of MTVR parts available. Contact for more details and questions. Not everything listed. 1.) Operational c12 Motor -$8,250 2.) Fuel Tank: $610 3.) Battery Box: $495 4.) 14' Cargo Bed, no sides: $ 1200 5.) Hood: $850 6.) Aircleaner housing: $450 7.) Lower Cab body, could be used...

Been working on troubleshooting a rear light blinker that does not work with Turn signal or Hazards turned on. Eliminated 1.) Rear light and bulbs are operational 2.) I believe I eliminated grounding issues From research on the site it seems I could have the following potential Issues 1.)...

GA-73M819 Ronald Harris Memorial Gathering 3/16/19 Lula Georgia 11:00 AM - 3:00 PM Lucille Harris and myself will be hosting a memorial gathering in memory of Ronald Harris. We would like to extend an invitation to all his extended SS family to join us on Saturday March 16th at 11:00 am - 3:00...

So Gimp and I are playing with new led install for headlights. We have a problem we have never seen. The high beams work. When switching to low the low beams fade out and go off. One fades out first then the other. We have 24 volts at the light the whole time. We grounded by hand also any...

Finally got all the pad area prepared to erect my LME tent. When I had the scrapper in building a pond I had them haul a bunch of loads into the area to create a flat zone. Add 36 ton of #4 and agg base and you have a nice maintenance and parking area. The tent is a 12 man operation for...

I hate that the M1102 bouncy thread closed :( My 1101 bounces all over and I have ran at 10 lbs to 50lbs trying to get the problem solved. I have talked to other owners who said they never experienced the problem. I did like the potential out of round suggestion but would be curious how many...

Things are rocking early. Day 2 of the rally is getting busy. We had a good show so far. I bought all the good stuff so far so I hope others are bringing new stuff :) Attendees as of Sunday afternoon: Ron John and Jane Phil (And Parents) Drew (And Crew) Emilie Steveooo Clint Dawn Chris...

I got one of those great texts from a friend who said one of his friends has a military trailer for sale. "Are you interested?" The answer was h.ll yes :) So I found 1951 M100 that had been in the Foresty dept until the last 2 years. Warp commander has under his control and awaiting action...

New project started on Sunday, "Bobbitt" This is a 925 truck that will be changed out with a 105 bed. 73M819 "The Mechanic" is working on this project Sunday 09.07 Activities Pickup necessary parts: -925 Main Truck -105 Trailer -Springs -Super Single Spare Tire mount -Load 105 in 925...

Many of us loose our wheel chocks and and easy fix is to create a tether so they don't get lost. These are easy steps 1. Purchase 1" manilla rope from 3DAngus 2. Cut 12' lengths plus 3' extra for splicing on each end 3. Splice in loops approximately 8" in diameter 4. Install on pintle hitch...

As many of you may be aware, the fine state of Georgia will not legally title the 900 series trucks or any military truck that is younger than 1986. I have been working behind the scene with different contacts within the Georgia Government to get legislation in place that would change the...

Welcome everyone to the 2013 Steel Soldiers Georgia Rally Buy/Sell/Trade thread. The purpose of this tread is to allow attendees to discuss what items people want to Buy, Sell or trade with others. This is a great way that the Steel Soldiers community helps each other out. We are now 70 days...

Looking for a ride for a partial M1009 CUCV fiberglass top. The top has been cut and only the front 15% remains so it is only about "24" deep and should weigh approximately 50lbs. It still is the full width. The picture below represents what it would look like. Would fit in the back of a...

Wow we can now blog! Nice Upgrade. Reviewing a new item on GL the last few days, should I or should I not that is always the question? Had to order a new wedge and socket today for the rear winch cable on the M62 after the winch kicked in gear at the Rally and tore out the cable end...

Me and 73M819 had fun this morning in the back to school parade at school. We took the 9th grade class on the M62 pulling the M1101 and the M1009 pulling the M101A2. The kids loved it and were throwing candy out to the middle and lower school kids. You have to watch Ron when he is out...

For those of you with a 6602 can somebody look at your Tachometer and get me the part numbers from the front of the tach please. Correct NSN Part Number from TM The correct NSN number for the 6602 is 6680-00-620-2325, Current NSN Part Number I have the following part number installed in the...

Trying to track down a leak on my Hydraulic steering assembly. The leak is from the front of the hydraulic control value as shown in the exploded attached TM view. Looking at my components I am missing J & L which are 2 O rings but they are not really key O ring elements in the whole design of...

After taking apart my rear axles and ordering a new rear seal I was informed that the axle spindle is supposed to have a wear ring that the rear seal rides on. Non of my axles had a wear ring. Has anybody seen a wear ring on their axles? No I have not been into the TM yet to look this up...

Can not post new threads today, can reply to existing I am having posting problems on a new thread this is a test from another machine

Will the Rapco 383 paints rattle cans hold up to the engine heat on the valve covers and other engine parts EXCLUDING MANIFOLDS. Search returned that others have used enamal OD green non heat on engine parts with good luck. I have some Rapco and wanted to paint some items while I have them...