• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Floridianson

    How to tell if cable is copper or another metal?

    I have some cables like that and I thought they were tinned copper. I did some good marine grade tinned copper wires when I up dated my boat. Much better corrosion resistant and you don't find the wire corrosion walking through the whole cable.
  2. Floridianson

    Jeepsinker's M35A2 6BT Cummins swap ( pics and videos)

    Yep nice up grade and yep looking good. Real power steering?
  3. Floridianson

    What did you do to your deuce this week?

    No problem I have plenty of plastic boxes new and old.
  4. Floridianson

    Problems with new injector lines

    Yea heard about the ones you can replace. Maybe that is what someone did. We won't know till he post's a pic or he knows that they have been changed.
  5. Floridianson

    What did you do to your deuce this week?

    I have a few old plastic battery boxes and can take off the handles if you need them. Just pay shipping.
  6. Floridianson

    What tool to take apart the fan clutch actuator on 923a2?

    Here is a older thread and the funny looking filter inside the elbow is a filter. Myself I would clean it. https://www.steelsoldiers.com/showthread.php?143231-92-shutterstat-fan-clutch-actuator
  7. Floridianson

    Problems with new injector lines

    I would be willing to bet those special end were put on with some kind of a stamping machine at a factory. Not compression fitted. When they work right the end will spin so as not to put a twist in the line when you tighten them down. Also the ones I have done do not need to be over tightened to...
  8. Floridianson

    More Fitting size questions from the PT pump

    You could also just do away with the primer pump / flame heater.
  9. Floridianson

    More Fitting size questions from the PT pump

    You have to be care full of what bottom ports the primer is tapped off of. One of the ports is the high pressure and if you open the primer with the engine running it will peg out the primer gage. The problem with that port and pluming the primer to it is if the hose gets a hole it will be under...
  10. Floridianson

    Airleaks.. where to look for them m813

    Yea should not be that hard to trace down air leaks. The way your fording kit is now it shuts off the engine road draft tube and supply's the air with just one pull of the cable. Does your power steering pump have a vent? It needs a water tight filler cap if you do not already have one.
  11. Floridianson

    Problems with new injector lines

    If your talking about the injector return lines then yes goes to the overflow valve and back to tank. Does run through the fuel filter over pressure relief valve but back to fuel tank. But don't forget there is no pressure coming out of the injector at the return lines /fitting. Some say they...
  12. Floridianson

    Problems with new injector lines

    Can you post a pictire of the lines you used and of the tips. The Deuce injector line tips are not the standard compression type and they could leak if the end was damaged. As for the line blowing off the end fitting I can not see that happing they way they were designed and put on.
  13. Floridianson

    What am I looking at here?

    :driver:Attitudes it's all about your attitudes around here. Jack & Jill drove up a real steep hill to fetch a pale of water in there Deuce. Good thing as they had a good attitude and the Deuce never lost oil pressure.
  14. Floridianson

    replacing multifuel stop cable

    Yep if it was bumped or rolled in gear and shut down left in it could drive away ghost rider style. Even worse ghost rider and wide open throttle.
  15. Floridianson

    Greaseable polyurethane sway bar bushings

    I checked mine on the 1088 and looks like I need a pair. Thanks for making these and PM sent.
  16. Floridianson

    replacing multifuel stop cable

    Good info for the newbie's that do a search if nothing else. We see more OP's not leaving the stop cable pulled out and motors going to wide open throttle because of a stuck fuel control assembly's.
  17. Floridianson

    replacing multifuel stop cable

    Here is a pic of just a standard locking pull type I googled for 18 bucks. You can get a locking one that when you leave the truck after use it stays locked in the shut down position. We want this so if the fuel control assembly ever sticks it is stuck in shut down not wide open throttle. Now...
  18. Floridianson

    Problem after new HH installation

    Yep Allen you got the hard stuff down pat now. Next truck you get bet you could take out the whole injection pump clean it and put it back together.
  19. Floridianson

    Axle Boots measurements

    Nice thought there Russ but boots for the Deuce not your 5 tonner.
  20. Floridianson

    Problem after new HH installation

    Yep just wanted him to check it if it was the quill shaft that is broken. Real pain to have to go back in and simple to check before head install. Just like turning the head upside down to check if plunger sleeve is floating free.
Top